Skip to main content
F3D
Adapter xả hơi cho nệm Quechua & bơm Quechua… 1

3 images

DIY

Adapter xả hơi cho nệm Quechua & bơm Quechua (Deflate Adapter)

By jodoll

Downloads
42
Likes
3
Views
394

Files 3 1,009.8 KB

  • Deflate_Adapter_v5_1777727786.f3dF3D · 76 KB
  • Deflate_Adapter_1777727788.3mf3MF · 46.9 KB
  • Deflate_Adapter_0.4n_0.2mm_PETG_MK4IS_23m_1777727788.bgcodeBGCODE · 886.9 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Do you own an airbed? Then you probably know the hassle of getting the last bit of air out the mattress to store it compactly. And in case you've bought yours at Decathlon, you probably wondered why Quechua pump you've bought to go with your Quechua airbed is able to deflate stuff but apparently not the very thing you bought it for.

Search no further! Here's a simple and quick print to make storing the airbed easier. No more pumping with one hand while pressing the pump's hose to the outlet of the airbed with the other hand. Just screw out the valve, get as much air out as you can, then connect the pump using this adapter and pump out the rest. And with the included lanyard you can attach the adapter to the hose so you won't lose it while not in use.

I noticed they recently updated the pump, so the adapter probably won't fit the new model, but the airbed seems unchanged. I've bought both of them in 2020, so when in doubt, quickly measure your airbed's outlet and pump's connector. I've measured 22,5 mm on the inside of the airbed's outlet (valve unscrewed) and 31 mm on the outside of the connector on the hose. In case you need to make adjustments, I included the source files.

Sadly I can't allow commercial, because the part is designed with the Fusion 360 Personal License.

Read more Show less

Print spec

Formats
3mfbgcodef3d
Model files
3
Total size
1,009.8 KB
Largest file
886.9 KB

0 comments

See all