Miếng bịt USB-C cho Sliger Chassis

The motherboards in both of my servers do not have a usb-c header, and I didn't want the cable just chillin in the chassis, so I made a blanking plate that replaces the cable so that there isn't a hole in the front IO. This filler should be compatible with all the Sliger chassis and other cases that use this style of usb-c cable.

To install into a Sliger chassis:

1.  remove the Front IO assembly
2. unscrew the 3d printed holder for the usb and usb-c
3. replace the usb-c cable with this filler. (I found it easier to get it aligned when you put the filler in part way and line that up before pressing the whole assembly into the case.)
4. Align the filler and usb ports with the standoffs on the back of the front IO plate and reinstall screws
5. :)