Skip to main content
F3D
Bộ Adapter & Extender 3-inch cho PolyDryer… 1

2 images

Máy In 3D

Bộ Adapter & Extender 3-inch cho PolyDryer (PolyDryer 3-inch Adapter & Extender Kit)

By KasperT_48704

Downloads
9
Likes
2
Views
341

Files 4 164.9 KB

  • PolyDryerAdapter-UpperHousing_1777696099.3mf3MF · 46.4 KB
  • PolyDryerAdapter-LowerHousing_1777696099.3mf3MF · 54.3 KB
  • PolyDryerAdapter-ExtendHousing_1777696100.3mf3MF · 38 KB
  • PolyDryerAdapter-ExtendPlate_1777696101.3mf3MF · 26.2 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#363040
Category
Máy In 3D
Published

Description

An adapter to hook a dehydrator to one or more PolyDryer storage boxes using a 3-inch, round vent hose. Glue upper plate to lower housing. Wall thickness is 4 mm. Air is not recirculated using this model. Read CAUTION and NOTES below:

CAUTION: any heat source (like a dehydrator) must be thermostatically controlled. Any heat source is a fire hazard. Use a smoke alarm. Don't leave unattended. Manufacture and use at your own risk! 

CAUTION: this kit requires appropriate filament material (heat deflection above 95 C)  to withstand 95 C temperature, without deformation. This means NO PLA or PETG or PVC or ABS or ASA or PA11, or any other filament with less than 95 C heat deflection temperature. Period. Don't burn your house down! Use a smoke alarm. Don't leave unattended. Manufacture and use at your own risk! 

NOTE: dehydrator adapter required.  Heat source must be thermostatically controlled. CAUTION! Any heat source, including a dehydrator, is a fire hazard. Use a smoke alarm. Don't leave unattended. Manufacture and use at your own risk! 

NOTE: requires use of proper vent hose (like aluminum) to withstand 95 C temperature. Any heat source is a fire hazard. Use at your own risk! This means NO PVC or ABS or any other material with less than 90 C heat deflection temperature. Period. Don't burn your house down! Use a smoke alarm. Don't leave unattended. Manufacture and use at your own risk! 

NOTE: This model is presently untested. Will develop this description as design is tested. No guarantees or assurances implied. Any heat source is fire hazard. Use a smoke alarm. Don't leave unattended. Manufacture and use at your own risk!

Read more Show less

Print spec

Formats
3mf
Model files
4
Total size
164.9 KB
Largest file
54.3 KB

0 comments

See all