
Móc sàn gập MOD cho KUKIRIN G2 (Foldable Deck Hook)
- Downloads
- 38
- Likes
- 5
- Views
- 732
- Remixes
- 0
- Comments
- 0
Files 6 1.3 MB
- pin_block_1777696039.stlSTL · 70.4 KB
- deck_block_1777696040.stlSTL · 69.3 KB
- hook_1777696040.stlSTL · 79.8 KB
- folding_bracket_1777696041.stlSTL · 403.5 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #363038
- Category
- Máy In 3D
- Published
- License
- Creative Commons — Public Domain
Description
No rattling noises and easy to fold.
Printable in 3 hrs in PLA with:
0.20 layer height.
5 layer wall loop.
20% infill in honeycomb 3D (30% infill for FOLDING BRACKET)
EXTRA STUFF NEEDED
- x4 M4 x 8mm nuts and bolts (to fix collar to stem).
- x6 M4 x 12mm bolts (to fix hook, hook slider and folding pivot).
- x1 SPRING 9.5x16mm (or other functioning) for folding lock pin.
INSTRUCTIONS:
1- mount 2 SUPPORT PART with the thicker part pointing downward around the scooter stem above the cable acces. Use 4 M4 nuts and bolts.
2- fix the HOOK to the FOLDING BRACKET using 4 M4 x 12mm bolts screwing directly trought the plastic (screw heavenly from the 2 sides).
3- insert spring and PIN BLOCK in the bigger hole on the SUPPORT RIGHT part and slide FOLDING BRACKET in place while pressing on the PIN BLOCK.
4- screw heavenly trought plastic the last 2 M4 x 12mm bolts until they touch without forcing them.
5- fix the collar in the position as shown in the image
USE:
unfold the bracket with the hook in the back position, make contact between deck and folding bracket and extend the hoow until it snap in place.
contract for support
Print spec
- Formats
- stl
- Model files
- 6
- Total size
- 1.3 MB
- Largest file
- 403.5 KB
0 comments
You may also like 12 models
See all-

-

-

-
New -

-
New -

-

-

-

-

-


