Adapter bracket DIN cho ThermEX26

This bracket allows you to mount ThermEX to a din rail using Voron PCB din clips.

More information about ThermEX can be found here:
https://github.com/comradef191/ThermEX/releases/tag/ThermEX26-V1

Voron PCB Din clips can be found here:
https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/Electronics_Bay/pcb_din_clip_x3.stl

Print settings:
Layer height: 0.2mm

• Extrusion width: 0.4mm, forced
• Infill percentage: 40%
• Infill type: grid, gyroid, honeycomb, triangle, or cubic
• Wall count: 4
• Solid top/bottom layers: 5
• Supports: NONE

Important note: This model is not scaled for shrinkage, scaling of model may be required for different materials used. The recommend material is ABS.

BOM:

M3 x 6 BHCS x4

M2 x10 Self tapping X4

ThermEX26 PCB X1

Voron PCB Din clip X2