Skip to main content
F3D
Khay tổ chức súng rivet Gridfinity cho bộ dụng cụ Yardstore 1

2 images

DIY

Khay tổ chức súng rivet Gridfinity cho bộ dụng cụ Yardstore

By Bnut157_99020_990202

Downloads
21
Likes
9
Views
372

Files 2 2.3 MB

  • Rivet_Gun_Tray_Gridfinity_V2_No_Tungsten_1766190194.stlSTL · 1.2 MB
  • Rivet_Gun_Tray_Gridfinity_V1_Tungsten_1766190195.stlSTL · 1.2 MB

Make a variant with AI

Build another version of this model.

Open Studio

Description

This is a gridfinity tray to fit any of the rivet guns that comes with the “737” kit from the Yardstore and maybe the Aircraft Tool Supply rivet guns. I need to verify that though. I modeled it specifically for my 4X gun but all the other sizes share the same handle. The only difference is the barrel length.

A large cut-out is provided for the tip of the barrel so a spring can be mounted on the gun while it is stored. I keep my quick-release spring mounted and I leave the honey-comb spring the the tray.

It also has storage for the two bucking bars that come with the kit.

I have a Snap-On ATI634T bucking bar that also has a slot in the tray. If you do not have this bucking bar, pick the "V2_No Tungsten" version.

Be warned this model uses a lot of filament unfortunately… around 350g depending on what type of infill you do.

Below are my settings

Printer: Bambu X1 Carbon

Material: PLA or PETG

Layer Height: 0.20mm

Infill: Grid, 8-10%

Walls: 2

Top Layers: 3

Print Time: 7hrs on standard print settings with a 0.6mm nozzle

Read more Show less

Print spec

Formats
stl
Model files
2
Total size
2.3 MB
Largest file
1.2 MB

0 comments

See all