
Cánh tay Robot servo 4DOF (servo Robot Arm 4DOF)
- Downloads
- 285
- Likes
- 33
- Views
- 2,271
- Remixes
- 0
- Comments
- 0
Files 24 20.5 MB
- RobotArmFusion_1777346963.f3zF3Z · 6.5 MB
- RobotArmSTEP_1777346965.stepSTEP · 12.1 MB
- Base_1777346966.stlSTL · 333.7 KB
- Cap_1777346967.stlSTL · 244.8 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #347278
- Category
- DIY
- Published
- License
- Creative Commons — Attribution
Description
This is the robot arm I made for my college project, it is designed to pick up and place cubes using computer vision. the complete proyect code and inverse kinematics can be found at https://github.com/papalino456/RobotArm, it uses an ESP 32 for the main control system and a separate ESP 01 for the led control using WLED, but you probably can bundle it in a single ESP, I powered it using a pretty overkill 12v 30A power supply, you can probably go without that much power, and lastly everything can be fastened with M3 and M4 screws, the only other hardware you need are two ball bearings 12x8x7mm
Print spec
- Formats
- f3zstepstl
- Model files
- 24
- Total size
- 20.5 MB
- Largest file
- 12.1 MB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-
New -
New -

-

-

-


