Skip to main content
F3D
Spoolholder Ikea Samla 22L 3 cuộn (hợp cả máy in nhỏ) 1

7 images

Máy In 3D

Spoolholder Ikea Samla 22L 3 cuộn (hợp cả máy in nhỏ)

By idesire90_470390

Downloads
176
Likes
29
Views
1,367

Files 6 2.5 MB

  • Spulenhalter_1777329966.stlSTL · 124.3 KB
  • 3x_spoolholder_D32_1777329967.stlSTL · 213.4 KB
  • Spulenhalter_v2_1777329968.stlSTL · 906.6 KB
  • 3x_Federspanner_Filament_D78_1777329969.stlSTL · 717.8 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

>Version for 1 Spool<

>Version for 2 Spools<

Update 2024-03-31

-Added Hygrometer (Xiaomi Miija Bluetooth Thermometer)

-Added spool clamps

-Added my remix of PTFE endcap

Update 2024-04-01

-Added a splitted in 2 parts version for smaller Printers

--------------------------------------------------------------------

Like, Share, Subscribe and check my other 3D models! 

A Spoolholder for 3 spools with up to 83mm width. There are some spools (Amazon ABS) which are around 80mm in width. 

Very easy to print. 

Printsettings:

2 walls

5% infill

0.25 layerheight

no supports

=260g Filament and 5h 30mins on an Voron Trident 350

The 3D Model is 133mm x 211mm 319mm (added splitted version for smaller Printers, which cuts the 319mm in half)

There is also free space an the buttom for silica gel / desiccant

Instead of the “(3x)_spoolholder_D32” I used a PVC tube with **⌀**32

There a are very cheap and should be available in every hardware store.

https://www.hornbach.de/p/installationsrohr-starr-m32-grau-3m/5005525/

Print the spool clamps in petg, no infill, 2 walls

Endcap

https://www.printables.com/de/model/827355-4mm-filament-tube-end-cap-for-reverse-bowden

For the reverse bowden I used a PTFE tube (OuterD=4 / InnerD3) without coupler.

Simply drill a D4 hole in the Container. They hold very well.

-----------------------------------------------------------------------------

Deutsch:

Update 31.03.2024

-Xiaomi Miija Bluetooth Thermometer hinzugefügt

-Rollenspanner hinzugefügt (aus PETG drucken!)

-PTFE Endstück hinzugefügt

Update 01.04.2024

-eine in 2 Teile geteilte Version für kleine 3D Drucker hinzugefügt

----------------------------------------------------------------------------

Liken, teilen, abonnieren und schau dir meine anderen 3D-Modelle an!

Ein Spulenhalter für 3 Spulen mit bis zu 83mm Breite. Es gibt einige Spulen (Amazon ABS), die etwa 80mm breit sind. 

Sehr einfach zu bedrucken. 
Druck-Einstellungen:
2 Wände
5% Füllung
0,25 Schichthöhe
keine Stützen
=260g Filament und 5h 30min auf einem Voron Trident 350

Am Boden ist Platz für Silica Gel

Das 3D Modell ist 133mm x 211mm 319mm (geteilte Version teilt das Maß 319mm in 2)

Anstelle des "(3x)_spoolholder_D32" habe ich ein PVC-Rohr mit ⌀32 verwendet.

Diese sind sehr günstig und sollten in jedem Baumarkt erhältlich sein.

https://www.hornbach.de/p/installationsrohr-starr-m32-grau-3m/5005525/

Die Rollenspanner aus PETG drucken, kein Infill, 2 Wände

PTFE Endstück

https://www.printables.com/de/model/827355-4mm-filament-tube-end-cap-for-reverse-bowden

Für den Reverse Bowden habe ich einen PTFE Schlauch mit Außendurchmesser=4 und Innendurchmesser=3 verwendet ohne Kupplungen.

Einfach ein D4 Loch in den Behälter bohren. Der PTFE Schlauch hält auch ohne Kupplung fest im Behälter.

Read more Show less

Print spec

Formats
3mfstl
Model files
6
Total size
2.5 MB
Largest file
906.6 KB

0 comments

See all