
UFS-094 Thêm T-Handle Hex Allen Key Wrench
- Downloads
- 2,684
- Likes
- 505
- Views
- 9,771
- Remixes
- 0
- Comments
- 0
Files 18 5 MB
- T_Han_2_5mm_1777259368.stlSTL · 473.5 KB
- T_Han_3mm_1777259369.stlSTL · 447.9 KB
- T_Han_2mm_1777259370.stlSTL · 425 KB
- t_han_stem_1_5mm_v2_1777259372.stlSTL · 242.9 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #343778
- Category
- DIY
- Published
Description
We had far too many wrenches on the bench, so we designed this new Allen wrench holder for all nine sizes. https://www.printables.com/model/776625-ufs-155-t-handle-hex-key-holder-allen-wrench-holde . Stop by and download for free. Leave a comment if you like the design. Thanks
Update Early Feb 2024:
The original set of five handles was enough for the cheap Allen wrenches you get when you buy a 3D printer. And for this they did a great job, but there are more larger sizes out there. I decided to add 5mm through 10mm. To do this the handles have to get bigger.
I started with these here: https://www.thingiverse.com/thing:4681814 . I added numbers to match the smaller wrenches. Then when I printed the first one, I found out that CagedChimp hadn't tested them and they were too small. So I scaled them up and they worked great. I added a 10mm size that was still missing.
You will have to print the handle and the matching posts for the large sizes.
Original post:
When I got a second printer I got another set of free Allen wrenches. I decided to try out these handles. https://www.thingiverse.com/thing:951909. You can also find it here on Printables, https://www.printables.com/model/16557-t-handle.
They fit well and hold the wrench, but didn't have the sizes marked on the handles.
I modified these to have the wrench size marked on the top and on the side. This helps pick the correct wrench.
If these work for you, then please give a like to the original designer. https://www.printables.com/model/16557-t-handle
Print Settings
Printer:
Artillery Genius
Prusa MK3S+
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
35% or more
Filament: Any PLA Any
Notes:
Supports are not recommennded. May need a brim.
Category: Hand Tools
Print spec
- Formats
- stl
- Model files
- 18
- Total size
- 5 MB
- Largest file
- 473.5 KB
0 comments
You may also like 12 models
See all-
New -

-

-

-

-
New -
New -
New -

-

-

-
New

