Skip to main content
F3D
Khung Robot kèm Bệ Gắn Động Cơ… 1

7 images

DIY

Khung Robot kèm Bệ Gắn Động Cơ (Robot Chassis with Motor Mounts)

By Indi_2471288

Downloads
277
Likes
13
Views
816

Files 4 653.5 KB

  • motorMount_1777218436.stlSTL · 25.7 KB
  • RobotChassisEBC4_v6_1777218436.stlSTL · 294 KB
  • ChassisFlat_1777218437.stlSTL · 163.8 KB
  • RobotChassis_MotorCase_1777218438.stlSTL · 170 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#341966
Category
DIY
Published

Description

Robot chassis for 4 wheeled robotic car using an Arduino or similar microcontroller. Motor mounts included to attach hobby motors to the chassis through slots in the chassis. I did not make any holes for attaching the microcontroller to the chassis since there are many microcontrollers that could be used. I would recommend putting a piece of masking tape on the chassis where you will drill the hole.

I included a picture of the chassis I am working on to give you an idea how it can work and how the motors are attached. Please note that the chassis I am using in the photo is an earlier version of the model.

Chassis can be stacked for multiple levels, holes included. I find extenders with 2.5mm threads work well. 

Simple 3D print using standard PLA. 

I also included a version for using a hobby motor without gear mechanism and a flat version for the second level

Read more Show less

Print spec

Formats
stl
Model files
4
Total size
653.5 KB
Largest file
294 KB

0 comments

See all