Skip to main content
F3D
BeamCase - Gá quạt một bên (nhiều kích thước) 1

7 images

Dụng Cụ Tiện Ích

BeamCase - Gá quạt một bên (nhiều kích thước)

By BeamCase_Des_1734300

Downloads
265
Likes
31
Views
1,137

Files 6 3.6 MB

  • one_sided_fan_bracket_120x25mm_1777183674.STLSTL · 594 KB
  • one_sided_fan_bracket_140x25mm_1777183675.STLSTL · 594 KB
  • one_sided_fan_bracket_120x17mm_1777183677.STLSTL · 638.9 KB
  • one_sided_fan_bracket_140x17mm_1777183678.STLSTL · 642.7 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

This fan bracket is made to add fans to your BeamCase. It comes in different sizes for 120mm, 140mm and 92mm fans of different thicknesses. The bracket is secured to the fan with standard fan screws and then screwed to the frame from the inside for optimal space usage. 
This bracket is optimal if you wanna save space and secure the fans only from one side.  

These brackets are designed to work together with the modular BeamCase ITX case which can be found here.

Required Hardware

Screws: 
M3x8mm countersunk screws for the 17mm version (2pcs per bracket)
M3x16mm countersunk screws for the 25mm version (2pcs per bracket)
standard fan screws (come with your fans)

Nuts: 
standard M3 nuts (2pcs per bracket)

Print Instructions:

Ideally print this model in a stronger and more temperature resistant filament like PETg or ABS. In order for the bracket to work perfectly it has to be printed accurately, so compensate for shrinkage. This print like all BeamCase parts does not require any supports. 

I adjust for ABS shrinkage by scaling the model to 100.5% (Bambu Lab P1S and Sunlu ABS) , but it depends on the filament and printer and print speed.

Read more Show less

Print spec

Formats
stl
Model files
6
Total size
3.6 MB
Largest file
642.7 KB

0 comments

See all