
Giáo Dục
Bộ Hiển Thị Seven Segment Cơ Khí (Phiên bản 2)
- Downloads
- 1,148
- Likes
- 562
- Views
- 10,890
- Remixes
- 0
- Comments
- 0
Files 13 8.7 MB
- cam_0-9_CCW_1777158898.stlSTL · 1.4 MB
- segment_1777158900.STLSTL · 9.3 KB
- front_plate_1777158901.STLSTL · 742.3 KB
- side_plate_1777158902.STLSTL · 664.8 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #339368
- Category
- Giáo Dục
- Published
- License
- Creative Commons — Attribution
Description
This is a mechanical seven segment display that counts from 0 to 9 using a single camshaft.
Non-printed parts
- 8x Square M3 Nuts
- 4x M3x6 screws (or longer)
- Plastic glue
Printed parts
- 1x Front plate
- 2x Side plate
- 2x Top/Bottom Plate
- 7x Segment
- 2x Pusher Right
- 2x Pusher Left
- 3x Pusher Center
- 7x Pusher Pin
- 1x Camshaft (pick one of the camshafts in the files, the default is 0-9)
- Optional: Knob. The unit can also be driven with a Lego Technic axle
Printing
The camshaft should be printed standing up with supports. Everything else can be printed laying flat without supports.
Assembly
- Insert four square M3 nuts into the front plate and glue them into place
- Put a pusher pin into each pusher plate and glue it in place.
- Connect a segment to each pusher as shown in the photo.
- Put the segments into the front plate.
- Attach the side plate on the side where the pushers don't have an opening and screw it into place.
- Optional: Insert square M3 nuts into the top and bottom plate and glue them into place. The nuts can be used later to attach other things to the seven segment display.
- Place the camshaft between the top and bottom plate and insert these pieces into the unit.
- Attach the other side plate and screw it into place.
- Attach the knob.
Print spec
- Formats
- stl
- Model files
- 13
- Total size
- 8.7 MB
- Largest file
- 1.7 MB
0 comments
You may also like 12 models
See all-

-

-

-

-

-
New -

-

-

-

-

-


