Phần nối mở rộng khay máy sấy (Dehydrator tray extensions)

I really liked the idea of the original model, but I remixed it so that each segment can snap together without any extra brackets.  I also simplified the design so each segment could be printed in vase mode resulting in 2mm thick walls.  Combine 3 segments for each extension.

I printed using the following settings:

• print the model upside down so the offset is at the top
• I used PETG material
• 0.40mm nozzle at 0.20mm layer height
• enable vase mode
• force “external perimeter” extrusion width to 1.0mm 

This will generate 2mm thick walls that seem to be plenty strong.  I've stacked these on the 5 trays so I can dry a whole drybox worth of filament: 4 rolls + desiccant.

Interestingly, with PETG material (both Overture PETG and Prusament PETG) I've noticed some shrinking/distortion of the sidewall at about 13mm up (~½").  No idea if this is a printer issue or just filament shrinking with something so thin and tall.  The result creates a perfect fit between the trays, though, so I'll take it.

Final dimensions when assembled:

• 234mm inside diameter
• 238mm outside diameter
• 57mm tall (not including 5 mm bottom lip)

Note: the model is actually 1mm larger in diameter than the above, but with PETG shrinkage seems to fit these dimensions pretty well.

Support

If you like my models and want to make my day, you can buy me a ☕!