
Nắp máng ăn gà PVC – Bản lề (Hinged Lid)
- Downloads
- 151
- Likes
- 56
- Views
- 1,529
- Remixes
- 0
- Comments
- 0
Files 1 91.6 KB
- elbow_cap_with_lid_2.0_1777012018.stepSTEP · 91.6 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #333390
- Category
- Đồ Gia Dụng
- Published
Description
This is a lid I designed for a 4" PVC chicken feeder similar to this one: https://www.sugarmaplefarmhouse.com/diy-chicken-f (no affiliation). It it designed to fit on the outside of a 45 degree elbow, so it has a larger ID than standard PVC fittings. Here is the exact 45 I used: https://www.lowes.com/pd/PVC-4-in-x-4-in-dia-45-Degree-PVC-Hub-Street-Elbow-Fitting/3130799?idProductFound=false&idExtracted=true. Note that this is not schedule 40 PVC.
The pictures are of V1 of this design. V2 removes the handles on the bottom portion of the lid since it didn't add any real benefits and the string for remote opening kept getting caught underneath the handles on the side.
I've printed it out of PETG and ASA on a Bambu X1C using the same model. The ASA was a bit tighter on the PVC fitting, but both worked. I pretty much just used default slicer settings (2 walls, 15% infill) on both of them. Print both parts upside down from how they will be installed and no supports are required.
Depending on your printer, the magnet slot may or may not be press fit. I added a dab of glue to make sure they stay in place.
Main features:
- Hinged Lid
- Slots for 12mm X 2mm magnet to keep lid closed
- Groove for TPU gasket to seal lid when closed (WIP)
- Large lip on bottom to minimize spilling
- Handle for opening/closing (or add a string to open it from outside the chicken run!)
Additional Hardware required:
- 4" PVC chicken feeder
- ¼" x 2" long (or greater) bolt for hinge.
- ¼" nut (I used 2 and jammed them together so it wouldn't loosen. You could also use a nylock nut, but I didn't have any)
- 12 mm x 2mm disc magnets (optional)
- String (optional)
Check out my lid with level indication here: https://www.printables.com/model/900183-pvc-chicken-feeder-lid-with-level-indication
Print spec
- Formats
- step
- Model files
- 1
- Total size
- 91.6 KB
- Largest file
- 91.6 KB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-

-

-

-
New -

-
New

