
Hộp Ảnh Twist Lock Photo Box
Remix of Hộp Trick Box Khóa Xoay (Hình Vuông) - Twist Lock Trick Box (Square) By 3DPrinty
- Downloads
- 246
- Likes
- 80
- Views
- 1,699
- Remixes
- 0
- Comments
- 0
Files 13 5.8 MB
- Demo_-_Exploeded_View_1777009833.3mf3MF · 759.6 KB
- Demo_-_Assembled_1777009834.3mf3MF · 752.4 KB
- Demo_-_Exploded_View_1777009835.stlSTL · 2.1 MB
- Demo_-_Assembled_1777009838.stlSTL · 2.1 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #333298
- Category
- Đồ Gia Dụng
- Published
- License
- Creative Commons — Attribution
Description
This tricky box has a hidden latch mechanism. Displays your photos and HueForge prints.
https://youtu.be/1muiuHjyLlU?si=QQX99Vuc3420_x2t
Printing
- All parts can be printed without supports.
- Print the base clips with two perimeters and zero infill so they can easily flex.
- Print the spring with enough perimeters that the spring arm is entirely solid.
- Add brims to prevent curling. All parts must print flat to fit correctly.
- Avoid silk or matte filaments on the mechanical parts on this design. These tend to be more brittle than regular filaments.
Assembly
See the video above for assembly.
Optional Assembly
- Add 6x3mm magnets to the topper and lid for slightly more snap in the puzzle mechanism
- Use glue or 6-8mm M3 bolts to secure the spring to the box lid
Dimensions
- Interior: 90 x 90 x 67mm
- Photo: 87 x 55mm
- Maximum height for HueForge panels (on edge of print): 0.9mm
Can I sell copies of this?
Yes! This project was shared under the Creative Commons - Attribution license.
This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.
Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.
This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.
Recommended Attribution Text
"Twist Lock Box (Photo)" (https://3dprinty.xyz/project/98) is designed by 3D Printy (https://3dprinty.xyz) and shared under a Creative Commons Attribution (CC BY 4.0) license (https://creativecommons.org/licenses/by/4.0/).
Print spec
- Formats
- 3mfstl
- Model files
- 13
- Total size
- 5.8 MB
- Largest file
- 2.1 MB
0 comments
You may also like 12 models
See all-

-
New -

-

-

-

-

-

-
New -

-

-

