Skip to main content
F3D
Bộ đẩy water jet cho thuyền RC – open source đầy đủ (v12) 1

15 images

DIY

Bộ đẩy water jet cho thuyền RC – open source đầy đủ (v12)

By XX189_2989762

Downloads
504
Likes
78
Views
3,145

Files 6 26 MB

  • motorHolder_v12_1777004443.stlSTL · 359.9 KB
  • teardown_v12_1777004444.stlSTL · 6 MB
  • mainPart_v12_1777004446.stlSTL · 3.5 MB
  • impeller_v12_1777004447.stlSTL · 1.8 MB

Make a variant with AI

Build another version of this model.

Open Studio

Description

I am try to create new another water jet boat propulsion for RC models.

Actual version used on by boat is "v12"

It is complete open source (only for non-commercial use, another license on request)

Do not hesitate to add comments about this design. Do not forget read comments, it contain many useful informations.

Designed for approximately 1m model boat.

Printed from PLA except impeller from PETG. It need 5x5mm M3 brass inserts. Insert in "jetRudler_v12.stl" are drilled by 3.2 drill.

OpenSCAD sources for v12 is here: https://gitlab.com/jdobry/waterJet/tree/v12

mainPart and motorHolder need to be glued together. Do itONLY with mounted shaft to the motor together not without it. It is necessary to have motor and shaft perfectly concentricall.

I am using 3536 1700KV motor+ESC combo (re-flashed by SimonK firmware O_POWER=470; O_GROUND=47; POWER_RANGE=1600*CPU_MHZ/16+MIN_DUTY) with 6000mAh 40C 3S LiPol battery. Result is 80A (930W) measured electric power.

2018-06-06: add more informations

2018-06-05: first public "final" version v12

2018-06-02: Real boat test https://youtu.be/jG33dKuQeQY

2018-05-26: 3rd test https://youtu.be/VpkvRb1sVZo

2018-05-12: first test https://youtu.be/7qWh_Ipw2Fk https://photos.app.goo.gl/55UOe9A346dyhPs23

Category: R/C Vehicles

Read more Show less

Print spec

Formats
stl
Model files
6
Total size
26 MB
Largest file
10.5 MB

0 comments

See all