Skip to main content
F3D
Bộ Hard Drive Cage Kit Type B cho case Fractal Design 1

5 images

Dụng Cụ Tiện Ích

Bộ Hard Drive Cage Kit Type B cho case Fractal Design

By Nirvash

Downloads
423
Likes
74
Views
3,911

Files 7 34.4 MB

  • HDD_Cage_v3_1776856586.f3zF3Z · 16.9 MB
  • HDD_Cage_v2_1776856588.f3zF3Z · 15.6 MB
  • Fit_test_1776856592.stlSTL · 56.7 KB
  • HDD_Cage_v3_1776856593.3mf3MF · 167.7 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

NOTE:
====================
If your tray is bigger than 14mm tall and 110mm wide you might have fitting problems.

I recommend printing a test first (or pause and park the toolhead) with like 1cm of the cage, and try the fitment I've included a 1cm fit test for those interested.

V3:
---------------------
Even more spacing!

V2:
---------------------

Thanks to imnotjames for pointing out I didn't leave room for any tolerances in my model. I updated it adding 0.6 mm between the top of the tray and the bottom of the rail.

I also added more mounting holes for the top SDD, because the original holes probably didn't have any room for the SATA connectors.

Original post:
---------------------

I haven't found a printable 3D model of the drive cage for several Fractal Design cases, so here it is. I haven't printed it personally because I don't need it. I just modeled while it was out of the Meshify 2 case I just bought because I'm waiting on other parts.

I hope somebody finds it useful and that the holes I modeled really fit. :P

Print it face down so you should not need any supports at all.

I based my model off this Type B tray:

https://www.thingiverse.com/thing:4487637

Read more Show less

Print spec

Formats
3mff3zstl
Model files
7
Total size
34.4 MB
Largest file
16.9 MB

0 comments

See all