K1 ITX PC Case Modular – Vỏ PC ITX dạng module (SFF) tùy biến & mở rộng

K1 Small-Form-Factor ITX Case

Hardware Compatibility:

GPU Compatibility & CPU Cooler Height: 

max. Size: 290mm*59mm*120mm 

G…PU max thickness

C…PU Cooler max height

Variation 1 

G 43

C 65 for NH-L9x65

Variation 2

G 59

C 49

Two x 240-Radiators[240 AIO]

124x282mm x [20mm + Hat height]

K1 is expandable in it’s height, to accommodate a variety of cooling options from Air cooling up to sophisticated custom loops. 

Expansion modules are sized from 5-50mm and stackable on each other. K1 starts with 20mm headspace, while the 20mm footspace should be reserved for cable organization.

SFX & SFX-L PSU

125x64x130mm

K1 supports with a rack-slot-System both SFX and SFX-L PSUs. This system allows the PSU to be smoothly pushed into place and can easily accommodate bulky Liquid AIOs through rearranging the Headspace Above the PS.

Interchangeable Sidepanels 

200x300x3 mm

The Sidepanels are held in place by a magnet & nickel-band combo, to provide easy access and easy modification. Sized 20x30x0.3 cm you can easily order custom acrylic-glass from online laser-cut-services or design Sidepanels yourself!

New Sidepanels

New Feets

Small-form-factor Forum

You will find a more detailed development log about the beginnings of the K1.

I am open for any questions or constructive criticism, message me on the above links!

Instruction Manual PDF 

Available Remixes

K1 240 v2

K1 240 v3

K1 Max 280 

max GPU

290x59x120mm

300x60x160mm

350x80x160mm

Printtime

0.6 nozzle

40h+30h

40h +35h

50h +40h

Free

10€

10€

This model

Kofi-Shop

Kofi-Shop

optimized for

CPU AIO

AIOs & custom loops

special features

ATX PSU

Accessories:

Check out my Kofi-Shop for more additional Parts and Accessories!

Custom Sidepanels, Grills, Feets and More!

With monetary incentive I can create more compatible add-ons with quality, instead of quantity!

Shoppinglist:

No Affiliate Links!

PCIe x16 Riser Cable(choose one)

my sample pcie 3.0

pcie 4.0

Dual reverse riser

180-200mm

ssupd | aliexpress

aliexpress

90° riser

200-220mm

de | us

de | us

would recommend ADT-Link for their variety in pcie risers, for other projects

Power Extension & Switch

cable length

aliexpress

IEC320 C14 to C13 Extension cord

30cm ~ 1ft

right angled

Power Button

+15cm

[22|19|16|12mm]

Screws

CS M3x6mm

60

CS M3x10mm

50

CS M3x20mm

4

M3 ruthex inserts

20-30

UNC 6-32x6 hex

1

M3x6mm standoff

4

M3x6mm pan head screw

4

Dont want to buy standoffs and UNC-hex screws?

Kofi-Shop-K1 v2 model doesn't need those!

CS = Countersunk screws if not mentioned otherwise

Magnets

Magnet 

D6x3mm

20

Nickel-Steel Band 

10x0.15mm

1.2m

Doublesided tape

3m 300lse

1.2m

Filament

~1kg Filament (preferably heat resistent for the Barebone Parts to avoid warping)

ABS ASA PETG to name a few

Exact amount ⤵ 

Required Prints Checklist:

Barebone 60h:
☐ Front Barebone + Riser
☐ Mid GXX
☐ Backplate GXX
☐ 2x Main Beams

Cosmetics +40h:
☐ Front panel
☐ Grills
☐ Sidepanels
☐ Feet
☐ Hats

What Parts do i need to print?

———————————————

Total Printing Time: ~100h

No Supports needed!

Inserts absolutely recommended!

[ruthex-branded M3x5.7 inserts] [us|eu|de]

You can also use similar M3-inserts with the blind hole dimensioned at 4x5.7mm.

If you trust your 3D printer you could print everything out in a week of time, initiating a print every 8-12 hours.

My settings for reference only:
- Bed-adhesion: 4mm Brim
- Layerheight: 0.2mm
- Bottom/Top-thickness: 0.8mm
- Wallthickness: 1.2mm
- Innerwall Flow: 102%
- max Speed: 50mm/s
- Infill: 30%