Skip to main content
F3D
Opinsert - Insert trượt cho Misumi slides trên robot FTC 1

2 images

DIY

Opinsert - Insert trượt cho Misumi slides trên robot FTC

By Ahmad Hanafi Hanafi

Downloads
249
Likes
4
Views
1,375

Files 3 543.9 KB

  • Left_Insert_1776813117.stlSTL · 163.8 KB
  • Right_Insert_1776813118.stlSTL · 163.9 KB
  • Standard_Model_1776813119.stepSTEP · 216.3 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#324418
Category
DIY
Published

Description

Don't want to go on onshape and figure out what config you need, here is a pre exported version of the most popular configuration of opinsert, along with a bill of materials for everything you need.

-----------------------------------------

BOM (per insert):
1x m3 30mm SHCS

1x  m3 lock nut

1x m3 v-groove pulley (3x12x4)

(if using Misumi sar 2xx, use Misumi tsar 4-12 for screwing the slides together)

-----------------------------------------

Recommended print settings are: PETG or ABS, .2mm layer height, 4 top and bottom layers, 3 side layers, 40% infill.

-----------------------------------------

If you want to use other configurations of this design, go to https://cad.onshape.com/documents/4f3446e64b18f76af4773a36/w/84d84ca5d4800093934b8589/e/7adfb8c1449541a132fe5a9c

Read more Show less

Print spec

Formats
stepstl
Model files
3
Total size
543.9 KB
Largest file
216.3 KB

0 comments

See all