
Công cụ cạo cho bề mặt in 3D an toàn
Remix of Giải pháp loại bỏ trầy xước trên bề mặt in 3D By Tor G G
- Downloads
- 8,536
- Likes
- 1,289
- Views
- 33,086
- Remixes
- 2
- Comments
- 453
Files 5 17.5 MB
- scraper2_02mm_petg_mk3s_1h47m_1766486190.gcodeGCODE · 2.7 MB
- Scraper2-15percent-infill_0.2mm_PETG_MK3S_2h8m_1766486191.gcodeGCODE · 3.1 MB
- scraper2_1766486186.3mf3MF · 1.9 MB
- scraper2_1766486187.stlSTL · 8 MB
Make a variant with AI
Build another version of this model.
Remix versions 2
Dao cạo bàn in (Scraper) với thiết kế infill lục giácByMattBoyer · 04/21/2026
Công cụ cạo bề mặt cho máy in 3DByAleXutzZu · 03/21/2025
Details
- Model ID
- #31098
- Category
- Máy In 3D
- Published
- License
- Creative Commons — Public Domain
- Tags
Description
Note added Oct. 5, 2021 : As some people have had problems printing this without infill, I have added files for 15% rectilinear infill.
This scraper can be safely used on the build plate with little danger of scratching or gouging the coating. This was inspired by a similar print by Tor G, but I decided to create a new 3D model. My design uses the same basic features as Tor G, but I widened and lengthened the handle. This Version 2 uses much less filament than my Version 1 and prints 30% faster, but is a little more flexible.
See also Version 1 for my first design with internal ribs.
I should add that the Tor G design is very good and worth a look; I just enjoy creating my own models (and I need the practice!).
The OnShape 3D CAD file for this are available here:
Print instructions
Note added Oct. 5, 2021 : As some people have had problems printing this without infill, I have added files for 15% rectilinear infill.
Print flat side down with 0% infill. The internal structure is hollow, with three ribs to strengthen the blade (see the photos which show printing in progress). I rotated the print 45 degrees to get it to fit on the build plate.
I printed in PETG on a textured plate. It would probably work in PLA as well for many uses, as long as you keep it away from high temperatures.
Print spec
- Formats
- 3mfgcodestl
- Model files
- 5
- Total size
- 17.5 MB
- Largest file
- 8 MB
453 comments
You may also like 12 models
See all-

-

-
New -
New -

-

-

-

-

-

-

-


