Giá treo tường Echo Dot thế hệ 4 & 5 (Wall Mount)

This is a wall mount for the 4th and 5th generation Echo Dot, which can be mounted with two screws. The device fits tight into the mount, the light ring at the bottom remains visible and there is enough space for the power plug.

The centers of the two mounting holes are spaced 44mm apart. The Echo Dot 4th & 5th generation have a diameter of 100mm. With this mount, it stands out approximately 120mm from the wall.

The holes for the screws are 5mm and recessed into a 10mm whole. The screw holes are countersunk. I did use 4,5 x 40 wood screws. I included a drill guide, which is the same size as the original mount on the wall, so you can easily position the wholes and measure with a level.

I printed mine in PLA with support, 6 walls and 25% infill in 0.2mm. It makes a quite solid impression when mounted on the wall.