Skip to main content
F3D
DNL Kaabo Mantis 10 Mudguard [std/wide, front/back] 1

7 images

DIY

DNL Kaabo Mantis 10 Mudguard [std/wide, front/back]

By Danol

Downloads
264
Likes
15
Views
1,761

Files 10 18.6 MB

  • mantis10Mudguard_stdBack_1776457611.3mf3MF · 1.1 MB
  • mantis10Mudguard_stdFront_1776457612.3mf3MF · 1 MB
  • mantis10Mudguard_wideBack_1776457613.3mf3MF · 1.2 MB
  • mantis10Mudguard_wideFront_1776457614.3mf3MF · 1.1 MB

Make a variant with AI

Build another version of this model.

Open Studio

Description

NON COMMERCIAL USE ONLY. If you intend to print this commercially, please contact me for licensing.

Longer mudguard/fender for Kaabo Mantis 10. Comes in variants:

  • Standard (90 mm) | Wide (110 mm)
  • Front | Back

Mudguards are longer than the original counterparts - especially the back mudguard is way longer, making it much more effective. Because of the length, the mudguards require extra support if you don't want them to snap. Also includes a damper spring protector part.

Hybrid metal support

There's a plastic support part that you can attach to the brake nuts, but I've been having issues with the plastic support not being strong enough, so I've also designed a separate hybrid metal support where one part (same for all variants) is laser cut from 2mm stainless steel.

Print config & hardware

Print config I've tested it with (I've included a 3mf file with the settings I'm using):

  • PETG, 240 °C
  • .6 mm nozzle, .3 mm layer height, .8 mm extrusion width
  • 20% infill, 2 perimeters

You'll need:

  • 4× M3x12 screw as a replacement for the short ones present with the default mudguard.
  • 2× M5x16–20 screw + locking nut for attaching mudguard to the base
  • 1× M5x12 screw + locking nut for attaching support to the mudguard
  • If using the metal support, you'll need one extra M5×12 screw and nut.

Read more Show less

Print spec

Formats
3mff3dgcode
Model files
10
Total size
18.6 MB
Largest file
4.1 MB

0 comments

See all