Cây thông Noel trang trí họa tiết PCB

Updates

• 12/2025: Created additional PCB-themed ornaments for your (real) tree :)

• 12/2024: Added a version with a star as tree topper. The star is also available as a separate download and could be added to the tree afterwards, but the tolerances are not optimized for this.

Description

A multicolor Christmas tree with PCB traces on the front. The model does not require a multi material unit to print. The tree is around 22 cm tall, 18 cm wide and simply slots into the base. It fits on common 220 x 220 mm beds when rotated by 45°.

Colors @ 0.2 mm layer height are:

• For the tree

  • Dark green (layers 1-20)

  • Silk copper, silk gold or silver (layers ≥21)

• For the base / trunk

  • White, light green or light brown (layers 1-15)

  • Dark brown (layers ≥16)

Print settings

• Layer height 0.2 mm

• Line width 0.4 or 0.5 mm

• Infill 20% ("Lines" recommended)

• 3 wall lines

• 5 top & bottom layers

• Supports not required

Approximate print times @ 60 mm/s: Tree 2:45 h / Base 1:05 h