Case Corne Wireless - Hỗ trợ switch MX và Low-Profile

Absolutely loved the original design but it wasn't perfect for my Wireless Corne. So, I made few variants of 6-column layout to fancy my or somebody else's needs.

Updates

• v1.1 (04-Nov-2024) - Added more variants. Checkout STEP v1.1 and STL v1.1 folders
  • Added thin models for both mx and choc. These are similar to void's original design and can be used with any Corne v3 PCB out there.
  • Moved the MCU hole upwards with an arch design over it, useful if u like to use mill-max sockets to mount it.
  • Added tented variants of low profile.
  • Added filled and pattern base for all the variants.
• v1 (16-Oct-2024) - Initial Release
  • mx_tented_pattern - MX style. Tenting support.
  • mx_tented_filled - Same as above but with filled base, so honeycomb style pattern on the bottom.
  • mx_non-tented_pattern - MX style. No Tenting.
  • mx_non-tented_filled - Same as above but with filled base.
  • lp_pattern - Low profile. Space for 4mm thick battery at the bottom.
  • lp_filled - Same as above but with filled base.
  • lp_thin - Very Low profile. No space for bottom battery, instead place battery under the MCU like the typeractive corne.

 All non-thin variants have space for ≤4mm thick battery at the bottom and thin variants are similar to Void's original case design so battery will be placed under mcu like the typeractive corne.

---

Refer to the Differences of the remix compared to the original at the bottom to read more about the changes.