Vỏ bàn phím Corne cho 5 và 6 cột

Crkbd / Corne case compatible with v2 and v3 hotswap PCBs and fr4 switch plates.

Builds pictured in this thing were purchased from 42keebs (the kit includes pcbs, trrs jacks, reset switches, diodes and hotswap sockets, top and bottom plates, oled covers as well as an assortment of screws and standoffs; we made use of the covers, standoffs and top plates).

Updates

• 13/08/24 - added step files for all versions of the case
• 07/11/23 - added new revision for non tented versions of the case with footprints for 10mm diameter non-slip silicone feet (original releases still available under the Old Rev STL folder)
• 06/11/23 - added eiga tented w/ 600mah battery for the 5 column version of the case

Showcase

Big thank you to eiga for the videos including the SLS PA12 nylon version of the case, as well as a transparent resin print of it.

• SLS PA12 Nylon

• SLA Translucent Resin

Files

Six columns

• 6col_flat - flat case design
• 6col_eiga_tented - flat case design with custom tenting
• 6col_1.5d_600mah - 1.5 degree outward slope, designed for nice!nano wireless builds; it has a tray for a 304050 3.7V 600mAh Li-Po battery (attached w/ double sided tape)
• 6col_eiga_1.5d_600mah - same as above, with tenting mount points from eiga version
• plate_6col_A - 1.5mm plate for five column builds. variant A is suitable for pbcs using kailh hotswap sockets
• plate_6col_B - 1.5mm plate for five column builds. variant B is suitable for pbcs using millmax 0305 hotswap sockets. flip and lay flat on print bed

Five columns

• 5col_flat - flat case design
• 5col_eiga_tented - flat case design with custom tenting
• 5col_1.5d_600mah - 1.5 degree outward slope, designed for nice!nano wireless builds; it has a tray for a 304050 3.7V 600mAh Li-Po battery (attached w/ double sided tape)
• 5col_eiga_1.5d_600mah - same as above, with tenting mount points from eiga version
• plate_5col_A - 1.5mm plate for five column builds. variant A is suitable for pbcs using kailh hotswap sockets
• plate_5col_B - 1.5mm plate for five column builds. variant B is suitable for pbcs using millmax 0305 hotswap sockets. flip and lay flat on print bed

Bill of materials

• 10 x m2x8mm countersunk screws for the 600mah battery versions of the case; m2x4mm if using any of the flat cases - aliexpress
• 10 x m2x5mm button head screws - aliexpress
• 10 x m2x8mm female-female standoffs - aliexpress (for standard 1.6mm fr4 plates; if you plan on using thicker plates, such as 3mm acrylic ones, you will need to subtract the difference in thickness from the standoff, eg: 3mm plates would require 6.5mm standoffs)
• 8 x m5 socket head cap screws of various lengths according to your own preference, for the tenting version - aliexpress
• 8 x m5 locknuts, for the tenting version - aliexpress
• 4.7mm inner diameter rubber caps, for the tenting version - aliexpress
• 8 x 10x2mm silicone feet - aliexpress variant K1002

Misc

• battery life with 600mah Li-Po is ~2 months on the central half (60 days of usage with 20% remaining charge, own testing), 9+ months on the peripheral (tbc, quoted by the zmk power profiler)
• battery life with 110mah Li-Po is ~1 week on the central half, ~3 weeks on the peripheral