
Dụng Cụ Tiện Ích
VOID Ergo S - Bàn phím cơ Split tự lắp ráp bằng công nghệ in 3D
- Downloads
- 136
- Likes
- 35
- Views
- 1,640
- Remixes
- 0
- Comments
- 0
Files 6 14.4 MB
- VOID_Ergo_S_-_bottom_left_1776383657.stlSTL · 7.4 MB
- VOID_Ergo_S_-_bottom_right_1776383660.stlSTL · 983.3 KB
- VOID_Ergo_S_-_plate_left_1776383662.stlSTL · 190.9 KB
- VOID_Ergo_S_-_plate_right_1776383663.stlSTL · 190.9 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #303887
- Category
- Dụng Cụ Tiện Ích
- Published
Description
The VOID Ergo S is a 3d printed, handwired, split keyboard running QMK Firmware on Pro Micro controllers.
Bill of materials
- 46 diodes (tme.eu/aliexpress)
- 44/46 cherry mx style switches
- 24 AWG (0.2 mm2) wire
- 2 x Pro Micro (aliexpress)
- 2 x EC11 Rotary Encoder (optional - aliexpress mounted to the plate using this adapter)
- 10 x M2x12 allen head screws (aliexpress, 14mm overall length, 4mm diameter head)
- 10 x M2 brass inserts (aliexpress, 3.5mm outer diameter)
- 2 x PJ320A 3.5mm female audio connectors (aliexpress)
- 1 x 6x6x6 push button (aliexpress)
- hot glue for securing the Pro Micros to the bottom case(optional, but recommended)
Printing the models
- All models have been saved with the correct orientation; if for whatever reason they are not loaded correctly in your slicer, print them as it follows:
- The bottom parts should have their bottom faces touching the build plate.
- Supports are not necessary, but I'd recommend using them as the ports will print with less imperfections. The right case might throw an error when slicing with supports (at least it did for me) regarding empty layers; I used a support enforcer right over the port in PrusaSlicer to fix that.
- The plates should be printed with the top part (smaller inner diameter for the switches) touching the build plate. No supports needed here.
- No supports needed for the top parts either, print with the bottom touching the build plate.
STL mirror / QMK fork
The files are also hosted on Github, along with a QMK fork that contains a basic keymap. More info here
Print spec
- Formats
- stl
- Model files
- 6
- Total size
- 14.4 MB
- Largest file
- 7.4 MB
0 comments
You may also like 12 models
See all-

-

-
New -

-

-
New -

-

-

-

-

-


