Skip to main content
F3D
Dụng cụ chà nhám (Sanding Tool) 1

1 image

DIY

Dụng cụ chà nhám (Sanding Tool)

By zkobol90_1724632

Downloads
1,608
Likes
414
Views
9,197
Remixes
1

Files 4 2.9 MB

  • screw_1776327638.3mf3MF · 188.8 KB
  • washer_1776327639.3mf3MF · 213.9 KB
  • nut_1776327640.3mf3MF · 960.6 KB
  • body_1776327641.3mf3MF · 1.6 MB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Description

Specifications:

The sanding tool requires 140x10mm sandpaper (cut from an arc), and you need to print one of each part.

Assembly Instructions:

  1. Cut strips of sandpaper (140x10mm).
  2. Insert the screw into the washer, then into the body; lightly screw on the nut.
  3. Place each end of the sandpaper strip under the washer and around the body.
  4. Hold the body with your fingers at the ends, gently press the body together to pre-tension the sandpaper, and tighten the nut.

Print Instructions: Print with a 0.4mm Nozzle and a layer height of 0.1-0.15mm, with 100% infill.

Read more Show less

Print spec

Formats
3mf
Model files
4
Total size
2.9 MB
Largest file
1.6 MB

0 comments

See all