
Chú lính kẹp hạt dẻ (Nutcracker) phong cách truyền thống Đức
- Downloads
- 373
- Likes
- 99
- Views
- 2,529
- Remixes
- 0
- Comments
- 0
Files 30 3.8 MB
- 1._Hat_1776075054.stlSTL · 240 KB
- 1.2_Hat_-_Top_Decal_1776075055.stlSTL · 56 KB
- 1.3_Hat_-_Front_Decal_1776075057.stlSTL · 177.3 KB
- 1.4_Pin_2x_-_Head_Hat_1776075059.stlSTL · 43.9 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #298037
- Category
- Sự Kiện - Lễ Hội
- Published
Description
The all time classic,
a Traditional German Nutcracker!
I've designed this one based on a real woodcrafted piece of my Grandfather.
As i wanted to practice on designing, i gave this one a try! Tolerances are not high, so everyone can assemble it. If it ends up tight and you're using PLA. Soften the material carefully with a lighter👊😝
Important!
I recommend printing “1. Scaled & correct orientation (recommended)” this contains the scaled up version at 200 percent, inlcuding the correct orientation.
The 2nd Folder “2. Original 3mf FIles (Scale up between 150-200 percent)” is for scaling it yourself and contains the 3mf Files. Note that the original size is to small.
All the parts are printed with a layer height of 0.2mm, some parts are better printed with a Brim. If you guys want me to be specific with the Color of all the Layer Changes, let me know!
Here are the Details!
- Almost entirely Support free! except for the one part “Hat - Front Decal”.
- Multicolor! Can be printed with a single color Extruder
- Functional Jaw (not intended for cracking actual nuts)
Share your Results and Tag me on Instagram!
https://www.instagram.com/chaymberr_crafts/?hl=en
Looking forward to your prints!
Happy Holidays!🥁🎁🍻👊😝
LOG:
- 04.01.25 - Changed name of "5. Hinge & Joint" into “5. Arm joint” and added notes to add clarity.
Print spec
- Formats
- 3mfstl
- Model files
- 30
- Total size
- 3.8 MB
- Largest file
- 509.4 KB
0 comments
You may also like 12 models
See all-

-
New -
New -

-

-

-

-
New -

-

-

-


