Skip to main content
F3D
Vỏ case Orange Pi Zero 3 tích hợp quạt 30mm 1

3 images

Dụng Cụ Tiện Ích

Vỏ case Orange Pi Zero 3 tích hợp quạt 30mm

Remix of Vỏ cho Orange Pi Zero 3 với thiết kế đơn giản By TheParanoidEn_917266

By robots914_2415876

Downloads
273
Likes
27
Views
1,262

Files 5 363.2 MB

  • orangepizero3_case_body_with_fan_countersink_1775995503.stlSTL · 1.3 MB
  • orangepizero3_case_body_with_fan_pan_head_screws_1775995504.stlSTL · 1.3 MB
  • OrangePiZero3_Base_StandardHex_1775995506.stlSTL · 749.9 KB
  • regular hex case top modified with fan countersink screws.f3dNot available yet

Make a variant with AI

Build another version of this model.

Open Studio

Description

This is a modified version of TheParanoidEngineer's Orange Pi Zero 3 case. This version is taller and incorporates a 30mm fan, with space for heat sinks. This is derived from the Standard Hex version with external antenna and access to GPIO and USB. Only the top has been modified; you can use whichever version of the base you want. I've included the standard version of the base for your convenience, or the rest can be downloaded from the original model's page.

I included the .f3d files in case you wish to further modify the design. I feel obligated to include a warning that they are a total mess.

Required Hardware:

  • 4x - 30mm M3 Screws- your choice of either pan head or countersink, I've included model files for both
  • 4x - M3 Nuts
  • 1x 30mm fan - I used this one, which uses M2.5 screws spaced 23.8mm apart
  • (Optional) Heat sinks for the ICs. I used these ones.

Print settings:

  • Layer Height: 0.25mm
  • Infill: ≥50% (recommended)
  • Supports: I recommend supports only for the nut recess holes. The top piece should not require any supports.

Read more Show less

Print spec

Formats
f3dstl
Model files
5
Total size
363.2 MB
Largest file
244.5 MB

0 comments

See all