
Khung máy tính ATX cơ bản / Test bench dạng mở
- Downloads
- 167
- Likes
- 19
- Views
- 669
- Remixes
- 1
- Comments
- 0
Files 9 2.3 MB
- ATX-v1.2-all-parts_1775874176.stlSTL · 1.1 MB
- ATX-v1.2-psu_1775874176.stlSTL · 203.1 KB
- ATX-v1.2-psu-extension_1775874177.stlSTL · 83.2 KB
- ATX-v1.2-core_1775874177.stlSTL · 337.7 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #295051
- Category
- Dụng Cụ Tiện Ích
- Published
- License
- Creative Commons — Public Domain
Description
-The minimum required for the ATX tray are models Core and IO to hold the motherboard and pci cards (6 motherboard screws, or with the extensions, 9 motherboard screws).
-8 total models snap-fitted and then secured with a total of 25 size M3x12mm( or similar) nuts and bolts (phillips head recommended).
-Optional stand for using the tray in upright position.
The motherboard and pci cards can be directly screwed onto the tray stands/holes with generic motherboard screws.
The best print-result for me was to print without changing orientation and using a 0.4mm nozzle for the snap-fitting connections.
The taller models have 1mm horizontal support beams to be used with tree supports and are to be cut away.
-Models are max 18.2cm in length
I suggest cutting out one of the pci-slot beams if its in the way of inserting a thick hmdi plug.
03-30-2026 - v1.2 reverted small added spacing to now true dimensions.
02-27-2026 - added 3 extra screwholes on the extensions to actually make the model ATX.
02-26-2026 - v1.1 updated the models, added an optional stand.
02-25-2026 - corrected io-shield height and added extra holes for nuts/bolts to the extension parts.
Print spec
- Formats
- stl
- Model files
- 9
- Total size
- 2.3 MB
- Largest file
- 1.1 MB
0 comments
You may also like 12 models
See all-

-

-
New -

-

-

-

-

-

-

-

-
New


