Khay sấy hạt hút ẩm cho SUNLU S2

The model is designed to be printed in two halves and glued together.

I printed mine in eSUN ABS+, but you can also use other high-temperature materials (at least PETG). Note that some PETG blends can go soft if left to cook at 70°C for long periods.

• Main Body and Side Clip need to be duplicated. They are symmetrical so no mirroring needed.
• Print Side Clip and Bottom Clip with support when printing in ABS/ASA. Otherwise, you can get away with no supports.
• Use cyanoacrylate glue on clips to attach the parts. CA glue may have issues sticking to PET, so you may have to apply a bit of force and let it cure longer than usual if printing with PETG.
• If printing in ABS/ASA, use brim to prevent warping.