Skip to main content
F3D
Các tấm đế thay thế cho máy phay Ryobi 18v 1

1 image

DIY

Các tấm đế thay thế cho máy phay Ryobi 18v

By rpkempland_458338

Downloads
180
Likes
46
Views
1,118

Files 10 4 MB

  • Ryobi_Trim_Router_Base_Plate_-_Round_1775495573.3mf3MF · 403.5 KB
  • Ryobi_Trim_Router_Base_Plate_-_Square_1775495574.3mf3MF · 402.9 KB
  • Ryobi_Trim_Router_Base_Plate_-_Round-Template_Bushing_1775495574.3mf3MF · 423.6 KB
  • Ryobi_Trim_Router_Base_Plate_-_Square-Template_Bushing_1775495575.3mf3MF · 423.9 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

I modeled up some replacement base plates for my 18v Ryobi trim router, I made a square version as well as a round version. Additionally I made versions to fit some template bushings I bought from harbor freight

https://www.harborfreight.com/router-template-guide-set-9-piece-59369.html

It may work for other template bushings, here are the dimensions to check:

Hole size dimensions:

Center hole I.D = 1.2 inches

Center hold counterbore O.D = 1.4 inches

Center hole counterbore depth = .1 inches

I printed mine in ABS with 30% infill and .2mm layer height, but I imagine PLA, PETG, ABS, PC, or any reinforced nylons would work just fine as well. Supports are not required for the non-template bushing versions, however the template bushing versions will need supports for the center counterbore. Additionally for the square bases I added little pads 1 layer thick at the corners to help fight against warping for materials prone to warping. The intention was for them to be trimmed off after printing.

*UPDATE 2/4/25*

I added 3 new square baseplate sizes, 5" x 5", 5.5" x 5.5", and 6"x6". I also increased the center hole I.D  on these new plates to be 1.75" however these new plates are not compatible with the above mentioned template bushings.

*UPDATE 2/5/25*

I added 3 new round baseplate sizes, 5" x 5", 5.5" x 5.5", and 6"x6". I also increased the center hole I.D  on these new plates to be 1.75" however these new plates are not compatible with the above mentioned template bushings.

Read more Show less

Print spec

Formats
3mf
Model files
10
Total size
4 MB
Largest file
423.9 KB

0 comments

See all