Tai nghe đơn giản (Simple Headphones)

Hardware you'll need:

1. it is designed to get these 50mm drivers stuck but you can try hotglueing yours

2. headphone jack, you'll hotglue the bottom part to get it stuck

3. a fabric headband to sew, I tried my best drawing some sketches

4. an hanger to cut in pieces. It looks adjustable but to actually adjust it you need to get out the hanger staffs cause it get pressed well together

5. 100mm pads, they are circle shaped but you'll make them into ovals when inserted on the "inside" piece

6. cables and soldering equipment

There is also an arc version where you can hide the cables inside the fabric headband if you wish.

Flaws:

• the head width is fixed

• pads aren't well pressed against your head

• it is not easily adjustable

Features:

• single sided jack

• soft head rest

• oval pads

• a single piece to get the pads on

• closed back

Print 4x inserts to combine yokes and arc. Yokes and insides are the same for both sides, shells not.