
Giá đỡ thẻ Tufty 2040 cho màn hình TFT
- Downloads
- 138
- Likes
- 17
- Views
- 1,777
- Remixes
- 2
- Comments
- 2
Files 6 2.7 MB
- Tufty-2040-Front_19m_0.16mm_205C_PLA_ENDER2PRO_1765867891.gcodeGCODE · 406.3 KB
- Tufty-2040-Back_53m_0.16mm_205C_PLA_ENDER2PRO_1765867892.gcodeGCODE · 337.7 KB
- Tufty-2040-Middle_1h25m_0.16mm_205C_PLA_ENDER2PRO_1765867893.gcodeGCODE · 1.6 MB
- Tufty2040Badge-Back_1765867888.stlSTL · 69.8 KB
Make a variant with AI
Build another version of this model.
Remix versions 2
Hộp đựng huy hiệu Tufty 2040 với nam châm hỗ trợByCommputethis · 03/30/2025
Giá đỡ pin AAA cho biểu tượng Tufty 2040 phiên bản RemixByMyrcurial · 03/19/2025
Details
- Model ID
- #28828
- Category
- DIY
- Published
Description
Pimoroni's Tufty 2040 is a great RP2040 badge with an integrated TFT screen.
- 2.4" colour IPS LCD display (320 x 240 pixels)
- Driver IC: ST7789v
- Connected via parallel
- Dimmable backlight (adjustable via PWM)
- Powered by RP2040 (Dual Arm Cortex M0+ running at up to 133Mhz with 264kB of SRAM)
- 8MB of QSPI flash supporting XiP
- Phototransistor for light sensing
- Five front user buttons
- Power and boot buttons (the boot button can also be used as a user button)
- White LED
- USB-C connector for power and programming
- JST-PH connector for attaching a battery (input range 3V - 5.5V)
- High-precision voltage reference for battery level monitoring.
- Qw/ST (Qwiic/STEMMA QT) connector
I created a 3D printable badge which uses three layers to sandwich Tufty 2040. The three sections are held together using M2 18mm machine screws.
To power the badge, I used a 1000mAh LiPo battery which fits neatly inside the case. Note that Tufty 2040 has no charging circuit, so batteries / cells need to be charged externally.
The badge was printed using Overture Neon Green silk PLA on an Ender 2 Pro.
I printed using the following settings
bed_temperature = 60
bottom_fill_pattern = monotonic
top_fill_pattern = concentric
bottom_solid_layers = 5
fan_speed = 100
0.16 quality
0.4 nozzle
infill = 25%
first_layer = 210 Celsius
other_layers = 205 Celsius
travel_speed = 100
perimeter_speed = 40
solid_infill_speed = 40
top_solid_infill_speed = 30
first_layer_speed = 20
infill_speed = 40Print spec
- Formats
- gcodestl
- Model files
- 6
- Total size
- 2.7 MB
- Largest file
- 1.6 MB
2 comments
You may also like 12 models
See all-

-

-

-

-

-

-

-
New -

-

-

-


