
Hộp đựng pin AA có nắp
- Downloads
- 126
- Likes
- 16
- Views
- 383
- Remixes
- 0
- Comments
- 0
Files 12 8.5 MB
- battery-holder-1xAA_1775136902.stlSTL · 559.6 KB
- battery-holder-2xAA_1775136902.stlSTL · 576.7 KB
- battery-holder-3xAA_1775136904.stlSTL · 593.1 KB
- battery-holder-4xAA_1775136905.stlSTL · 610.3 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #282158
- Category
- DIY
- Published
Description
I wasn't happy with the existing battery holder models, so I made my own!
This is designed to work with the following spring clips:
Single tabs: https://www.amazon.co.uk/dp/B07HRVL2JC but should fit a tab that is 12mm x 12mm with a tab no wider than 2.6mm where the metal is less than 0.35mm thick. Retention is enhanced if the main body of the spring has a dimple on the two sides to bring the edge width to approx 1.3mm
Double tabs: https://www.amazon.co.uk/dp/B0DNQH349H but should fit a tab that is 28mm x 12mm. Retention is enhanced if the main body of the spring has a dimple on the two sides to bring the edge width to approx 1.3mm
If there is demand for larger numbers of batteries let me know in the comments, though beyond 6 I would likely need to increase the wall thickness to prevent excessive bending from the springs.
Should print without supports
There are two versions for each, one without mounts and a second version designed to be mounted with 2 M3 bolts
Print spec
- Formats
- stl
- Model files
- 12
- Total size
- 8.5 MB
- Largest file
- 894.3 KB
0 comments
You may also like 12 models
See all-
New -

-

-

-

-
New -

-

-

-

-

-


