
Battery Boxes | AA/AAA/C/9V/D/Button Cell
- Downloads
- 513
- Likes
- 0
- Views
- 0
- Remixes
- 0
- Comments
- 0
Files 27 32.1 MB
- BoxAA.3mf3MF · 358 KB
- LidAA.3mf3MF · 241.1 KB
- LidAA_SingleColour.stlSTL · 634.8 KB
- Lid_NoLabel.stlSTL · 346 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #419874
- Category
- DIY
- Published
Description
Info
Large battery boxes for most common battery types. There are options for AA, AAA, C, 9V, D and most button cell batteries that you commonly get with those multipacks. The box for the button cell batteries is not super space effiecient, but the labels look very nice imo :)
The lids can be printed with a multi-colour label, inset label or without a label.
Number of batteries per box:
AA - 41
AAA - 72
C - 13
9V - 21
Button cell - different per cell type
D - 8
Based on my clean storage boxes. If you want an empty version of these boxes, you can find them here:
Printing
The boxes can be printed in any material. For the clips I would recommend PETG as has a bit more give but they will also work with PLA.
Print in the orientation given and only use the supports I provided in the file.
After printing remove supports from the box and from the inside of the clip as shown in the pictures.
Sizes
The dimensions are the outside of the boxes without the hinges or clips.
Footprint:
148.2mm (w) x 99.2mm (d)
Height:
All other boxes: 56.3mm
Button cell box: 46.4mm
Hardware
3x M3 x 30mm
Print spec
- Formats
- 3mfstepstl
- Model files
- 27
- Total size
- 32.1 MB
- Largest file
- 21.4 MB
0 comments
You may also like 12 models
See all-
New -

-

-

-

-

-

-

-

-

-

-


