Skip to main content
F3D
Dốc (Ramp) tham số cho ngưỡng cửa - Dành cho robot hút bụi 1

5 images

Large file collection Đồ Gia Dụng

Dốc (Ramp) tham số cho ngưỡng cửa - Dành cho robot hút bụi

Remix of Ramp Cửa Cho Robot Hút Bụi By bugsymalone_2145690

By mangoDB

Downloads
137
Likes
26
Views
935

Files 46 7.2 MB

  • Door_Ramp_9x50x800_vanilla_1775098461.f3dF3D · 399.8 KB
  • Chamfered_VHB_9x50x800_1775098462.f3dF3D · 369.3 KB
  • ALL_Parts_Chamfered_VHB_9x60x800_1775098463.3mf3MF · 708.7 KB
  • LeftEnd_60mm_1775098464.stlSTL · 34.7 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

This is a parametric ramp for a robot vacuum.

I reconstructed the design based on Richard Butler-Malone’s design using Fusion’s parametric model.

For an 800 mm threshold and 50mm depth(10.2°, 18% incline) version, you need the following parts:

  • Left fixed parts: 50 mm(same as preconfigured depth) + 80 mm 
  • Configurable middle part: (180 mm × 3) + 80 mm
  • Right fixed part: 50 mm(same as preconfigured depth)

For an 800 mm threshold and 60mm depth(8.5°, 15% incline) version, you need the following parts:

  • Left fixed parts: 60 mm(same as preconfigured depth) + 80 mm
  • Configurable middle part: (180 mm × 3) + 60 mm
  • Right fixed part: 60 mm(same as preconfigured depth)

Note:

  • The left and right end parts have a fixed width equal to their depth.
  • The left-1 part has a fixed 80 mm width.
  • Only the middle part’s width can be adjusted.

All parts share fully configurable height and depth, which are applied uniformly.

The uploaded vanilla model stl/step file covers a threshold with a height of 9 mm and a width of 800 mm. In addition, the files in the Chamfered_VHB folder include modifications for cases with silicone for threshold fixation; in these files, the bottom part of the ramp (which contacts the threshold) is recessed by 1.6 mm for better fit and features a 0.3 mm slot for 30 mm wide double-sided tape.

For the remaining configurations, please download the f3d file and modify the parameters accordingly.

This is my first parametric model. I have not thoroughly tested all scenarios, so there may be many issues (with a very high probability, I guess). If you encounter any problems, please do not hesitate to leave a comment.

Read more Show less

Print spec

Formats
3mff3dstepstl
Model files
46
Total size
7.2 MB
Largest file
1.1 MB

0 comments

See all