Ngàm VHB cho Bento Mini

This is a remix of the Bento Box Mini V0.2 bottom cradle, replacing the extrusion tab with a flat plate for VHB tape mounting to any flat surface.  I designed this to mount a Bento Mini to my Voron Switchwire deck plate which doen not have an extrusion for attaching. 

There are two versions included: one with alignment grooves for 9 short strips of 10mm wide VHB tape and one without.

Print Settings:

• Material: ASA/ABS/PETG

• Orientation: Back side on bed

• Layer height: 0.2mm

• Walls: 3

• Infill: 40% gyroid

• Supports may be needed under the cradle overhang

Hardware:

• 2 × M3x6mm BHCS

• VHB tape