Skip to main content
F3D
T-nut dạng thả cho bàn làm việc Festool MFT 1

4 images

DIY

T-nut dạng thả cho bàn làm việc Festool MFT

By ORM_649441

Downloads
1,094
Likes
406
Views
6,290

Files 9 3.3 MB

  • T-nut_M3_threded_v2_1775168630.3mf3MF · 606.5 KB
  • T-nut_M4_threded_v2_1775168631.3mf3MF · 511.6 KB
  • T-nut_M5_threded_v2_1775168632.3mf3MF · 570.5 KB
  • T-nut_M6_threded_v2_1775168633.3mf3MF · 551.2 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Use the drop-in T-nuts to mount different accessories to the Festool workbench MFT. The accessory will be firmly attached to the workbench.

I made two different versions of the T-nuts, one threaded for M3 to M6 and the other for a nut or hex screw for M3 to M5.

Printing and print settings

In the model files, the parts are orientated in the direction best suited for printing. Use e.g. PLA and a nozzle width of 0.4 mm or less and an infill of 100 % to make it solid. For the threaded T-nuts you will need to print with a layer height of 0.12mm in order for the threads to be usable. My recommendation is a brim, as the footprint is small. No support structure are required for the printing. There is no need for post-print finishing and the screws are easy to screw in.

Read more Show less

Print spec

Formats
3mff3d
Model files
9
Total size
3.3 MB
Largest file
606.5 KB

0 comments

See all