Giá đỡ điện thoại cho chân máy ảnh

Print the two parts and add:
- 2x M3*40mm screw, cylinder head (depending on phone 30mm could be feasible)
- 2x M3 nut
- 1x Tripod ¼ inch threaded bushing / melting nut (e.g. by ruthex)

Melt the tripod thread into the bottom part, then add M3 nuts and screws.

-------------------------------
Material: PLA. For better sun/UV and temperature stability use PETG or similar.
Layer Height: 0.2mm to 0.1mm
Support: No
-------------------------------

Das Stativgewinde in das Unterteil einschmelzen.
Dann mit den M3 Schrauben und Muttern Ober- und Unterteil verbinden.