Skip to main content
F3D
OpenFlightSimConsole - Module thanh điều khiển bướm ga… 1

6 images

Large file collection Dụng Cụ Tiện Ích

OpenFlightSimConsole - Module thanh điều khiển bướm ga (Throttle Quadrant)

By Gerge_315226

Downloads
502
Likes
39
Views
3,647
Remixes
1

Files 21 9.5 MB

  • reverser_blockPin_1774465865.stlSTL · 101.4 KB
  • DetentPlate_1774465866.stlSTL · 207.4 KB
  • reverser_rotatorHub_1774465867.stlSTL · 241.8 KB
  • throttle_Body_cover_1774465868.stlSTL · 349.3 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Description

This page contains the instructions and files for printing and assembly of the throttle quadrant module. (electronics and other details for the whole unit on main page “OpenFlightSimConsole base”)

Fusion 360 model is provided for anyone to customize or remix the design. (potmount.stl design was lost)

BOM:

2x 10K potentiometers with 6mm diameter shaft

2x push buttons

small PCB prototyping board for buttons

bunch of 3mm diameter metal pins of various lengths (cut some nails without the head)

6x 20mm (cover joining pins)

4x 30mm (throttle-head joining pins)

2x 40mm (reverser spring center pins)

2x 25mm (reverser lever center pins)

~6mm long self tapping plastic srews ~2.5mm diameter (joining internal push rods)

12 10mm M3 countersink head bolts (side covers)

2x 25-30mm long 5-10mm diameter strong springs (reverser)

8x 10mm M4 bolts (cover screwplates on bottom)

4x 10mm M3 bolts (adjustable potentiometer mount)

8x 10mm M3 countersink head bolts with nuts for mounting to lasercut plate

Dust cover (optional) 40cm x 22mm plastic sheet with cutout for axis rod and reverser on the bottom of the throttle body. There are slots for the cover to slide in on each side and exit the bottom at each end.

for detent mechanism (optional)

2x 3.5mm Diameter ballpoint pen springs approx 2-3cm long

4x 4mm ball bearings (can also use plastic pearls)

8x 10mm M3 countersink head bolts for mounting detent plates

Printing:

All parts can be printed without support (see part list in assembly manual pdf)

Assembly:

Assembly is described in the attached pdf

Calibrate according to the instructions on the “OpenFlightSimConsole base” page

Read more Show less

Print spec

Formats
f3dfcstdpdfstl
Model files
21
Total size
9.5 MB
Largest file
1.6 MB

0 comments

See all