
Giá treo khăn cơ chế Cam Lock
- Downloads
- 66
- Likes
- 15
- Views
- 500
- Remixes
- 0
- Comments
- 0
Files 2 1,015.5 KB
- TowelGrip_1774434313.scadSCAD · 4.9 KB
- TowelGrip_1774434313.stlSTL · 1,010.6 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #262655
- Category
- Đồ Gia Dụng
- Published
- License
- Creative Commons — Attribution
Description
My in-laws had some cam operated towel holders from around the 1970’s and could not locate replacements.
The following OpenSCAD script generates a close approximation to the original. Printed with no support or rafts.
To use this grip/holder you need to print the 3 parts (base and two lobes) assemble them by pushing the lobs onto the pegs in the base. There is a feature built into the lobe to retain them on the peg using a bump which locates in the grove at the top of the peg.
Once assembled you put a sticky foam pad onto the back and attach to a wall. Ensure the lobes are not angled down and they should be facing each other. If they are pointing down then rotate the base 180 deg.
Print spec
- Formats
- scadstl
- Model files
- 2
- Total size
- 1,015.5 KB
- Largest file
- 1,010.6 KB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-
New -
New -

-

-
New -


