Skip to main content
F3D
Két Sắt Mini Với Cơ Chế Khóa 6 Lever Detector Lock 1

4 images

Large file collection DIY

Két Sắt Mini Với Cơ Chế Khóa 6 Lever Detector Lock

By RoccosStuff

Downloads
445
Likes
393
Views
6,470

Files 41 7.8 MB

  • Alignment_Jig_1774150843.stlSTL · 108 KB
  • Lock_Cap-Closed-Cover_1774150844.stlSTL · 133.6 KB
  • Lock_Cap-Closed-Slider_1774150844.stlSTL · 27.7 KB
  • Lock_Cap-Closed-Frame_1774150845.stlSTL · 26.8 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

This vault is small enough to print with the Prusa Mini and has a 6 Lever Detector Lock with warding and curtain, setting a new standard for 3D printed locks. It's easy to open with the key, but picking this open is extremely difficult.

This is an intricate mechanism with many moving and interlocking parts, making dimensional accuracy essential. This should ONLY be printed if you are confident that your printer is well calibrated and capable of printing dimensionally accurate parts.

Please refer to my Youtube video for assembly instructions, and watch the entire video before you begin assembly. Assembly should follow the order shown in the video. If you try to install things out of order, you might run into problems.

Files which end in “-x#' indicate multiple copies are required. For example: ”Vault Bolt-x8" means 8 copies should be printed.

Required non-printed pieces:

  • Metal dowels 
    • In the video, I use (2) 35mm x 5mm metal dowels for the lock and (2) 40mm x 5mm dowels for the hinges. 35mm x 5mm dowels can be used for the hinges, but they will be recessed inside the hinge, meaning they won't be removable. So, there are 2 options:
      1. As shown in video: 4 total dowels, (2) 35mm x 5mm and (2) 40mm x 5mm. Hinge dowels can be easily removed.
      2. (4) 35mm x 5mm dowels. Hinge dowels will not be removable
  • Ball Bearing

Recommended non-printed pieces, as shown in video:

Materials Used in Video:

  • Filament:
    • Prusament PETG: Pistachio Green, Orange
    • Hatchbox PETG: Gold
    • Bambu Lab PETG HF : Red, Green, Gray, Black, Lake Blue
  • Adhesive:
    • JB Weld Plastic Bonder

Optional Printed parts:

  • Alignment Pins - These are used to help align the Lock Cap and Vault Cap if you opt to omit the screws and threaded inserts. 7 are required, and they are all identical
  • Bogus Key - This key will NOT open the door, it can be used to illustrate the detector. The bitting for lever 4 is too big, so it will lift lever 4 too high and trip the detector
  • Box Weight Cover - Used to cap weight recesses at rear of box. It's not required unless you add weights.

Lock Cover Options:

  • Open Lock Cap is shown in video (aside from brief moment near end of video showing closed cover). The files required are:
    • Lock Cap-Open
    • Handle
    • Handle Mount-Bottom
    • Handle Mount-Top
  • Closed Cover is shown briefly near end of video. This cover is totally enclosed to block the lock, and includes a sliding keyhole cover. The files required are:
    • Lock Cap-Closed
    • Lock Cap-Closed-Cover
    • Alignment Jig
      • This is used to align ‘Lock Cap-Closed’ and ‘Lock Cap-Closed-Cover’
    • Lock Cap-Closed-Slider
    • Lock Cap-Closed-Frame
    • Handle
    • Handle Mount-Bottom
    • Handle Mount-Top

Read more Show less

Print spec

Formats
stl
Model files
41
Total size
7.8 MB
Largest file
645 KB

0 comments

See all