Giá treo máy đo độ ẩm buồng in cho Flashforge AD5M Pro

Simple hanging hygrometer mount for the Flashforge AD5M Pro chamber, designed to hold a small temperature/humidity meter without modifying the printer.

The mount hangs inside the chamber and keeps the hygrometer visible and easy to remove.

Features

• Simple frame for a small hygrometer

• Designed for the AD5M Pro chamber

• No modification required

• Easy to install and remove

• Useful for monitoring chamber temperature and humidity during printing

Notes

• Designed around the hygrometer shown in the photos

• Fit may vary depending on hygrometer dimensions

• Verify clearance before printing

• Designed in Plasticity

• Files included: STL, OBJ, Plasticity source file

Material

ASA recommended

ASA handles the higher temperatures of enclosed printers better than PLA.

PLA caution

PLA begins softening around 50–60 °C. Heated chambers can approach these temperatures, which may cause PLA parts to deform over time.

Print Settings

• Printer: Flashforge Adventurer 5M Pro

• Material: ASA

• Layer height: 0.18 mm

• Infill: 30%

• Supports: Yes

If you print one, post a make.