Skip to main content
F3D
Loa Mono cho Home Assistant Voice - Bản độ Creative Pebble… 1

5 images

Dụng Cụ Tiện Ích

Loa Mono cho Home Assistant Voice - Bản độ Creative Pebble V1

By vaclavmoravek_37432

Downloads
3
Likes
2
Views
200

Files 4 506.2 KB

  • Bedna_-_Box_-_PebbleV1_Enclosure_1774056379.stlSTL · 318.1 KB
  • Zadn_viko-_Back_cover_-_PebbleV1_Enclosure_1774056380.stlSTL · 99.3 KB
  • P_edn_kryt_-_Front_Cover_-_PebbleV1_Enclosure_1774056381.stlSTL · 80.6 KB
  • PebbleV1_Enclosure1_0_1774056381.scadSCAD · 8.3 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#259973
Published
License
OCL

Description

Sháněl jsem na speaker bez BT a automatického uspávání s minimalistickým designem. Nenašel jsem, tak jsem si ho vyrobil. Z jednoho páru Pebble jde celkem levně vyrobit dva mono speakery. Model je udělán tak, že využijete všech 8 šroubků z původních repro. 

Mám to na HomeAssistent voice, na hudbu to moc nebude, ale hraje to takto. - https://drive.google.com/drive/folders/1BiwkNChzc7HO8lTPFjUgk7eibd48G5BM?usp=sharing

Součástí balíčku je i openscad zdroják, kdyby bylo potřeba integrovat jiný typ reproduktoru.

Tisk je v pohodě, u hlavního boxu to chce podpěry. Infill alespoň 35% a výplň GYROID. 

Demontované repro - Creative Pebble V1 - Creative Pebble - Reproduktory - Creative Labs (Česká republika)

Zesilovač- PAM8403 - 1-10pcs PAM8403 module Super digital amplifier board 2 * 3W D Class digital amplifier board efficient switch potentiometer - AliExpress 502

U prvního speakeru lze použít původní USB konektor a jack. U druhého se to musí dokoupit.

-- nebo vypreparovat z kabelů kterých se válí doma miliony.

Desku zesilovače jsem na zadní kryt přidělal tavnou pistolí. To samé přední kryt.

//ENG:

I was looking for a speaker without Bluetooth and auto-sleep, featuring a minimalist design. Since I couldn't find one, I made it myself. A single pair of Creative Pebbles can be used to fairly cheaply create two mono speakers. The model is designed to use all 8 screws from the original speakers.

I use it for Home Assistant voice control; it’s not really meant for music, but this is how it sounds: https://drive.google.com/drive/folders/1BiwkNChzc7HO8lTPFjUgk7eibd48G5BM?usp=sharing

The package also includes the OpenSCAD source code in case you need to integrate a different type of speaker. Printing is straightforward; the main box requires supports. Use at least 35% infill with a GYROID pattern.

Disassembled speakers: Creative Pebble V1 - Creative Pebble - Reproduktory - Creative Labs (Česká republika)

Amplifier: PAM8403 - 1-10pcs PAM8403 module Super digital amplifier board 2 * 3W D Class digital amplifier board efficient switch potentiometer - AliExpress 502

For the first speaker, you can reuse the original USB connector and jack. For the second one, you’ll need to buy them separately—or salvage them from the millions of cables lying around at home. I attached the amplifier board and the front cover to the back housing using a hot glue gun.

Read more Show less

Print spec

Formats
scadstl
Model files
4
Total size
506.2 KB
Largest file
318.1 KB

0 comments

See all