Vulture 1886 Pattern (Bản mod Nerf blaster từ MHP's Vulture)

If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice

BOM (on top of the Vulture kit):

• M3x25mm SHCS qty 7

• M3x30mm SHCS qty 2

• M3 Nuts qty 9

• #4 Screws (3/8" Long) qty 14

5 walls and 99% gyroid for orange parts, 5 walls and 15% gyroid infill for the rest

Assembly:

This mod modifies the grip section, while the front furniture goes over the original parts. Modifications on the Upper Cover, Receiver R & L are cosmetic and can be kept as original if that's what you want

Grip uses most of the SHSC. Use M3x25mm in green locations, while M3x30mm in red locations

Red arrows use glue, with #4 screws in green locations for assembling the rare sight.

Use a 3mm bungee cord to tension the fake hammer

Use qty 7 #4 screws to assemble the front furniture. Glue on the name plates