Mini Rack - Kệ mạng mini chuyên nghiệp

Overthought and impractical, but when you need to haul some small network gear to a trade show, it should look organized, professional and special. The extra column over the front is to protect the front cables and switches and to tie wrap things to. It's approx 250(d)x252(w)x275m(h).  It's “stackable” just because such things should appear to be. Lots of holes for tie wraps and air flow. I printed it on a Prusa XL. It won't fit on small or medium printers. It mostly just snaps together except for the 5mm allen cap screws to hold the shelves in place, which end up holding it all together. The short (84mm deep) shelves and the longer ones can ft back to back. The screw spacing is all 16.5mm (vertical) so the shelves and spacers will fit at any increment.

The blank faceplate is for drilling/cutting or easy to make variations in cad.

An “improved” is available search for “Mini Rack 248” for a variant that will print on < 250mm printers.