
Khung Rack 2U kép cho Minisforum MS-01, MS-A2, MS-R1
- Downloads
- 531
- Likes
- 46
- Views
- 4,938
- Remixes
- 2
- Comments
- 0
Files 20 1.3 MB
- Minisforum_MS-01_Rack_Mount_All_Pieces_v3_1773826489.3mf3MF · 126.8 KB
- Minisforum_MS-01_Rack_Mount_Right_v3_1773826489.3mf3MF · 47.3 KB
- Minisforum_MS-01_Rack_Mount_Left_v3_1773826490.3mf3MF · 47.8 KB
- Minisforum_MS-01_Rack_Mount_Right_Blank_v3_1773826491.3mf3MF · 33.5 KB
Make a variant with AI
Build another version of this model.
Remix versions 2
Giá đỡ kép Minisforum MS-01 cho rack 19" chuẩn 2UByvojtagrec · 04/21/2026
Khung gắn tủ rack 2U cho Minisforum MS-01 (10" & 19", có quạt & keystone)Bymaze · 03/18/2026
Details
- Model ID
- #256302
- Category
- Dụng Cụ Tiện Ích
- Published
Description
Minisforum MS-01 MS-A2 MS-R1 Dual Rack Mount 2U
This should also work for the MS-A1, thought the dimensions are slightly small in width and depth, but the height is the same, so it should hold them snug, you'll just have a few mm gap to each side which should be hidden by the front retaining lip anyways.
Here are the factory sizes of each model for reference -
MS-01: 196×189×48mm
MS-A2: 196×189×48mm
MS-R1: 196×189×48mm
MS-A1: 189.5x186x48mm
Connect the 2 sides with M3 screws and secure the MS-01 with a screw in the back slots. I took some ideas from variations I saw online but couldn't find a dual mounting solution that didn't block the air holes on the MS-01.
Left/Right is as though looking from the front of the rack.
***v3 files added***
I've increased the size of the connection between the 2 and made it four M3 screws to secure them together better and increased the size of the of the mounting holes to accommodate M6 rack screws due to some feedback/concerns on another forum.
***v3 files added***
Print spec
- Formats
- 3mfstlzip
- Model files
- 20
- Total size
- 1.3 MB
- Largest file
- 248 KB
0 comments
You may also like 12 models
See all-
New -

-

-

-

-

-

-

-

-
New -

-


