Skip to main content
F3D
Tủ Rack Server/Mạng 10 Inch Dựa Trên Thanh Ray Cực Chắc Chắn 1

2 images

Dụng Cụ Tiện Ích

Tủ Rack Server/Mạng 10 Inch Dựa Trên Thanh Ray Cực Chắc Chắn

Remix of Tủ mạng 6U mini cho home lab By UjangKarnadi_294653

By plasticsuzy_366921

Downloads
200
Likes
52
Views
2,079

Files 5 335.9 KB

  • frame-support-left-and-right.stlSTL · 61.8 KB
  • frame-support-top-and-bottom-with-cutout.stlSTL · 43.7 KB
  • frame-support-top-and-bottom.stlSTL · 43.9 KB
  • side-panels.stlSTL · 158.2 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Remix of a remix. For use with 10" rack modules.

This design is meant to enable one build a low profile server, network or whichever equipment fits in a 10" rack. While idea is to print supporting structures and buy the rack rails to finish the build, it is definitely possible to print the rails as well even if that would not provide as much structural rigidity.

These are the parts one needs to build this rack:

  • 4x Rack Rails (I used - Adam Hall 61535B6)
  • 4x M5 16mm screws
  • 12x M5 12mm screws
  • 12x M5 nuts and washers, when no side panels are used
  • 24x M5 nuts and washers, when side panels are used

Optionally add the side panels for extra rigidity. Without the side panels there was a small amount of sway from the front to the back. With panels the rack is sturdy and there is no more sway. 

Thanks @KTriponis and @UjangKarnadi for the original design and remix!

Update 2025-06-18
Added side panels for extra rigidity.

Update 2025-06-09
Added frame-support-top-and-bottom-with-cutout.stl, added a cutout to allow space for rack panels touching the frame supports.

See my homelab collection for the models I used in the 10" rack: https://www.printables.com/@plasticsuzy_366921/collections/2421269

Read more Show less

Print spec

Formats
stl
Model files
5
Total size
335.9 KB
Largest file
158.2 KB

0 comments

See all