Skip to main content
F3D
NexGen3D: Tự làm máy Steam Machine giá rẻ chạy Bazzite 1

15 images

Large file collection Dụng Cụ Tiện Ích

NexGen3D: Tự làm máy Steam Machine giá rẻ chạy Bazzite

By NexGen3D

Downloads
2,382
Likes
241
Views
15,219

Files 45 26.6 MB

  • Steam_Machine_-_Not_for_printing_1773356836.3mf3MF · 8.1 MB
  • Case_Rear_-_V3_1773356838.3mf3MF · 452.4 KB
  • Case_Front_-_USB_-_No_Logo_-_Switch_-_V3_1773356839.3mf3MF · 562.8 KB
  • Simple_Accent_1773356839.3mf3MF · 779.6 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

If anyone would like to support me and my work, please feel free to donate/tip me on:

Australia and International: I've created a new online store as eBay fees and the shipping costs are just ridiculous, I've found the cheapest platform I could, so the price has come down on both the case and the shipping: https://nexgen3d.bigcartel.com/

USA: If anyone is unable to print this project, and you are in the USA, you can buy a case, professionally made here in ABS: https://www.etsy.com/listing/4433157329/bc-250-case-by-nexgen3d

UK: If you are in the UK and would like to purchase one of my cases locally, I now have a someone printing and selling the case on the UK Etsy store, just bare in mind that hex covers are printed 2 parts due to the size of his printers, but they are very well made as you will see from the images, lots of colours and options avaialble: https://www.etsy.com/uk/listing/4446733808/bc-250-steam-machine-case

Switzerland: If you are in the EU region and would like to purchase one of my cases, I now have someone in Switzerland offering it on their Etsy Store: https://www.etsy.com/listing/4451504715/bc-250-case-by-nexgen3d

A small donation is made to me on every case sold by these Etsy seller's is made to me.

Update 12/02/2026:

  • I've uploaded a version of the rear case to support the slightly larger server FLX power supplies, this allows for the extra width, I don't have one of these power supplies, so I will need feedback form the community on fitment.

Update 11/02/2026:

  • I've added a pin out diagram image for the FSP500-30AS Power Supply, please scroll all the way to the bottom to find it.

  • I've added a new limited edition colour scheme to the case's I sell on my website, I call it The Scandi its a matte white case with brown wood infused panels, and a mirrored alt version.

    • For this scheme you will want a stainless steel Power Button

Update 31/01/2026:

  • I have now uploaded a new version of the Rear Case with support for the 180 Degree USB Adaptors, make sure to buy the black one, NOT the blue one, I have also uploaded a Blank Cover for holes, so if you only want to run one, or none, you can print off a couple of blanks, PETG should be enough, or you can do in TPU if you have some.

Update 30/01/2026:

  • I've added a video to the how too section at the bottom of this page showing how to install the threaded inserts.

Update 28/01/2026:

  • I have created a new mount for the LOP series of Power Supplies from Meanwell, this mount has to sets of mounting locations, and is now supports the LOP-300/400/500/600 but the compromise is you need to run dual 4010 fans, you cant run 4020's as there just isn't any room for it, so I suggest investing in good 40mm fans like the dual ball bearing ones from GDStime or some Noctua ones.

  • I've updated the BOM to suit the new mount, I will leave the old ones there for those that want to use them,

Update 22/01/2026:

  • I'm now back from my trip and I will be making an alternative rear case to accommodate the 180 degree USB adaptors, I will do one for the USB 3.0 and one for the USB 2.0, and a snap in blank to cover them if not used.

  • Will be creating a blank cover for the Switch hole and the USB Hub slot for those that would like the option to add these later but would like to cover the holes.

  • All version 3 front styles have been uploaded and completed, please let me know if there is any issues.

-> NOTICE 12/01/2026 <- Please hold of on printing the case, I'm currently uploading the new version 3 case, this has some fixes and adjustments, increased exhaust slot size and tighter alignment of the 120mm cooling fan, and I have moved the cable access for the USB Hub, to above both USB ports, I have created a Version 3 folder, and over the next few days, I will be adding all of the different flavours of front cases, today, I have added the new rear case section, and the new front with logo, switch and USB hub.

Note: Please scroll to the very bottom of the post to see the correct orientation on you build plate, no supports required, manual filament change can be performed for the first few layers for the logo printing, so you don't need a multi material printer, it can be done on any machine through your slicer.

How To: For tips and guides on certain things, like how to open the fin stack of the cooler, I will add to the very bottom of this page, so please scroll down and take look.

Update: 15/01/2025

  • New Front Case Designs!

YouTube Performance Video:

This is the first time I have done this, but will I earn a few cents from some of these items linked here in the BOM, you certainly don't have to use them, the parts wont cost any different, but it just helps support my work if you do buy them through these links, if you find an alternative that is cheaper, then this is perfectly fine :)

Updated BOM:

The BC-250 Single Board Computer:

Recommend Power Supplies:

Lower Cost Alternative PSU:

Alternative High Quality Power Supply Setup (Not Recommended for Novices):

Recommend Fan: Artic P12 Pro

Alternative Fan: Arctic P12 Max:

If you are feeling rich, then this performs very similar to the P12 Pro:

Supported WiFi and Bluetooth Combo:

16 x M3 Threaded Inserts (recommend and designed for M3x3.5x4.6x6):

16 x M3 x 10mm Black Stainless Flat Socket Head Bolts:

16mm Latching 12v Switch with LED:

Notice: If you purchased this one from Aliexpress and did not receive the plug and wires: 16mm Latching Switch 12v with LED you will need to order this plug: 16mm Connector

Compatible USB 3 Hub:

Optional:

Update: 8/01/2026

  • I have now under request, created a new mount for the LOP-300 Power Supply, this now supports a 3 prong power cord with a switch and a fuse.

    • Link to the required socket switch combo: AC-14-F16B-2

    • The mount will require 13 x M3 Heat Inserts, normal 4.5mm thick ones will work fine

    • Its dimensions will now match the FLX in size.

Update: 7/06/2026

  • Updated the images for the correct orientation of the parts to reflect the updated part designs.

  • I've re-uploaded the following as it was reported to have been a corrupt file: Case Front - No USB - Logo - No Switch

  • I've uploaded an alternative fan mount and pressure booster for those that unfortunately decided to bend the fins up, instead of removing them, this mount adds another 1.2mm clearance, I will need feedback on this, as I have no way to verify if this is enough additional clearance for it to slide on easily, you will find it in the files as the "slim" version.

  • On request, I've created and uploaded a split top cover for the 38mm fan version to suit 220mm2 build plates.

Update: 6/01/2026

  • I've uploaded a new fan mount and matching super static pressure booster, I spent a few days testing this setup, and it offers the best cooling possible for a single fan.

Update: 4/01/2026

  • I have uploaded the following new front case versions:

    • Front Case With - USB - Logo - Switch - 38mm Fan

    • Front Case With - USB - No Logo - Switch - 38mm Fan

    • Front Case With - USB - No Logo - No Switch - 38mm Fan

    • Front Case With - USB - No Logo - Switch

    • Front Case With - USB - No Logo - No Switch

  • I've just uploaded a new vertical stand that is compatible with a 220mm2 build plate, as the existing one was too large.

  • I've uploaded new static pressure boosters, the standard has improved flow and geometry, the other has improved pressure capacity but will require a good fan like the recommend P12 Pro CO by Arctic, testing done with Furmark VK 10m runs, with no static booster, the GPU throttles quickly over a few minutes down to 1850mhz and sits at 90C, with the standard pressure booster, it sits at 1950mhz after about 4 to 5 mins, and with the super pressure booster, it holds at 2050mhz for the entire 10m run.

Update: 2/1/2026

  • I have uploaded a new more simplified fan mount, I've added some clearance to make it easier to install so its not so tight, and I have increased the static pressure booster, please provide feed back on fitment.

Update: 28/12/2025

  • I have now updated and added all flavours of the front case, you can now have it with or without logo's with or without the switch, I have also updated the USB Hub front case, but these only come with the Logo and Illuminated Logo at the moment, I may do a non logo version, but I will take a rest for a day so I can go play ARC Raiders on my Steam Machine :)

  • Below are some Photos of the USB front case:

Update: 27/12/2025

  • I have uploaded several new front case sections, 1 is an updated version of the Logo with power switch, the other 2 are in a folder called WIP as they are still experimental, both add support for the Anker 4 port USB HUB, this hub can be configured for external use, or internal use, one of these front cases also has the logos passing into the inside, so you can add led back lights to illuminate the Logo's and Accent.

  • Compatible USB Hub: Anker 4 Port USB 3 Hub

Update: 23/12/2025

  • Added a new mount for the LOP-300-12 Meanwell PSU, this will now accept 2 x 4010 or 4020 cooling fans:

Update: 22/12/2025

  • I have uploaded new versions of the top and bottom split hex covers for 220mm2 build plates, these are now similar to the 300m2 ones and have been designed to reduce material required, and will help reduce fan noise at higher speeds, please print these with outer side facing down onto the bed.

Update: 20/12/2025

  • I've added some new photos, and included a customary banana in one for sizing as this is apparently a standard internet rule of measurement.
  • Here are some comparison photos with the PS5, my machine is smaller, similar weight, and much easier to disassemble to clean out the dust, and if anyone has done this job properly on a PS5, then you will know what a pain in the backside it is to do.

Update: 14/12/2025

  • Uploaded new top and bottom hex mesh covers for the 300x300 bed, these have been hollowed out to reduce material requirements, and increased the gap between the fan intake, this helps reduce fan noise created at higher speeds.

  • Uploaded new side hex panels and optional vertical stand, these now require less material to print.

  • I've added a version requested by users in the Discord for a version to suit 38mm Thick server class fans, the fan is exposed on this one, so you will need supply your own grill, and its recommend as those are finger chopper fans, you will only need the custom front and rear case, and the top cover, all other components are standard.

Update: 13/12/2025

  • Added an optional front case with a power switch to toggle the PWR_ON of the power supply.

  • Link to the switch: 16mm Latching Switch 12v with White LED

  • There is many switches from many sellers that are exactly the same, and many colours available, just confirm the dimensions match:

  • Some renders:
  • Some actuals:

Update: 11/12/2025

  • I have created a Github Repo with scripts to run once you have installed Bazzite, these will optimise you BC-250 for gaming use, I will be adding more information to this repo very soon.

  • I have enough photos and videos now to produce a YouTube assembly guide, during the festive holidays I will create these along with a guide to install Bazzite from either Windows or Linux and some benchmarks and small gaming runs so you can see the expected performance.

  • Updated the benchmark images with the latest ones, at the bottom of this page.

Update: 6/12/2025

  • I have added some benchmarks to the very bottom of this thread if you re interested in its thermal performance.

  • I have added an alternative mount for a low cost power supply solution, the Meanwell LOP-300-12, this appears to be a solid little compact power supply, and is a good option for those that cant buy a Flex ATX power supply at a good price, you will need a small 40mm x 10mm 12v cooling fan for it, you just mount up the powersupply and load it into the case in the same position as the Flex ATX one.

  • Link to the Meanwell LOP-300 Data Sheet: https://www.meanwell.com/webapp/product/search.aspx?prod=LOP-300

  • Purchase Link: Meanwell LOP-300-12

Update: 5/12/2025

  • I have now added a top and bottom split hex covers that can be printed on a 220x220 bed, there is some locking keys that you need to use to secure the 2 halves together, maybe use some Superglue (Crazyglue) to bind them, and there is 2 more M3 x 8 to 12mm and threaded inserts required by each top and bottom hex panel.

  • I will not be printing these split covers, so I will require feedback if there is an issue, I suggest if the keys are too tight, then reprint them at 99% size.

  • Front and rear case sections have been updated to support the split hex covers as well

Update: 3/12/2025

  • I have done some additional testing, overclocking, undervolting and fan configuration, and I now recommend opening the full fin stack to allow for more airflow, fan to be blowing inwards on the fin stack, and I have updated the fan mount and included a static pressure booster as this cooler produces considerable amount of back pressure, see below image for correct orientation, this will yield the best cooling and a very low noise level.

Update: 2/12/2025

Link to a helpful guide: https://elektricm.github.io/amd-bc250-docs 

PC gaming has been a passion of mine since the days of the Commodore 64, I’ve owned and built many machines, I've always had a PC in my Living-Room and I love gaming on the couch, I also jumped on board and purchased one of the OG Steam Machines built by Alienware (Alpha).

Now after experience the magic of the Steam Deck and gaming on custom PC’s using my new favourite, Bazzite an immutable image based on Fedora Kinonite, I’m 100% sold on this, so I thought I would get behind a small movement to re-purpose some defunct hardware into a fully operational, low cost Steam Machine’s, that not only performs good, but looks great too.

This machine uses the AMD BC-250 board, these are fitted with slightly cutdown PS5 APU’s that were repurposed as blade like mining rigs, so we are re-puposing somet

Read more Show less

Read the whole body (8,128 characters left)

Print spec

Formats
3mf
Model files
45
Total size
26.6 MB
Largest file
8.1 MB

0 comments

See all